Selection of criteria for interchangeability verification of special alloys on the example of nimonic
DOI:
https://doi.org/10.15587/2313-8416.2016.70356Keywords:
non-ferrous alloys, nimonic, fuzzy clustering, ridge analysisAbstract
Research of nimonic long-term strength, which allows determining its value at different temperatures and the test of time are conducted on the basis of mathematical simulation. Criterion for interchangeability verification of special alloys on the example of nimonic is proposed. This criterion is based on a parametric description of the test property depending on the Lagrange multiplier and allows finding its suboptimal values in the investigated range of input variables
References
Horoshilov, O. N., Ponomarenko, O. I., Kipenskij, A. V., Nanij, V. V. (2012). Povyshenie kachestva nepreryvnolityh zagotovok iz mednyh splavov. Metallurgija mashinostroenija, 12, 29–31.
Breslavskij, D. V., Horoshilov, O. N., Ponomarenko, O. I. (2010). Upravlenie kachestvom nepreryvno lityh zagotovok. Vіsnik DDMA, 3 (20), 41–46.
Horoshilov, O. N., Ponomarenko, O. I. (2006). Issledovanie konstrukcionnyh harakteristik srezov na dorne pri proizvodstve polyh zagotovok iz cvetnyh splavov. Lit'e i metallurgija, 2, 187–189.
Chibichik, O. A. (2007). Analiz tehnologicheskogo processa zalivki rotorov jelektrodvigatelja i vozmozhnye puti ego usovershenstvovanija. Eastern-European Journal of Enterprise Technologies, 6/1 (30), 55–60. Available at: http://www.nbuv.gov.ua/old_jrn/natural/vejpt/2007_6_1/EEJET_6_1_2007_55-60.pdf
Akimov, O. V., Chibichik, O. A., Red'kina, A. V. (2013). Sovershenstvovanie tehnologicheskih processov izgotovlenija lityh detalej rotorov dlja povyshenija jekspluatacionnyh harakteristik tjagovogo jelektroprivoda. Problemy mashinostroenija, 16 (5), 7–12.
Ponomarenko, O. I., Trenjov, N. S. (2013). Komp'juternoe modelirovanie processov kristallizacii kak rezerv povyshenija kachestva porshnej DVS. Technology audit and production reserves, 6/2 (14), 36–40. Available at: http://journals.uran.ua/tarp/article/view/19529/17205
Akimov, O. V. (2003). Analiz pogreshnostej formoobrazovanija otlivok koles turbin turbokompressorov dlja nadduva DVS na jetape izgotovlenija ih voskovyh modelej. Eastern-European Journal of Enterprise Technologies, 3 (3), 16–24.
Bidulja, P. N. (1961). Tehnologija stal'nyh otlivok. Moskva: Metallurgizdat, 352.
Djomin, D. A. (2011). Metodologija formirovanija funkcionala dlja zadachi optimal'nogo upravlenija jelektroplavkoj. Technology audit and production reserves, 1/1 (1), 15–24. Available at: http://journals.uran.ua/tarp/article/view/4082/3748
Djomin, D. A. (2013). Nechetkaja klasterizacija v zadache postroenija modelej «sostav – svojstvo» po dannym passivnogo jeksperimenta v uslovijah neopredeljonnosti. Problemy mashinostroenija, 16 (6), 15–23.
D'omin, D. O. (1995). Dejaki aspekty upravlinnja jakistju chavunu z plastynchastym grafitom. Kharkiv, 181.
Splav NIMONIC. Available at: http://www.bibusmetals.com.ua/fileadmin/materials/PDF/catalogs_new_2013/nikel/NIMONIC__Alloy_75_RU_EN.pdf
Idan, A. F. І., Akimov, O., Golovko, L., Goncharuk, O., Kostyk, K. (2016). The study of the influence of laser hardening conditions on the change in properties of steels. Eastern-European Journal of Enterprise Technologies, 2/5 (80), 69–73. doi: 10.15587/1729-4061.2016.65455
Kostyk, K. (2015). Development of the high-speed boriding technology of alloy steel. Eastern-European Journal of Enterprise Technologies, 6/11 (78), 8–15. doi: 10.15587/1729-4061.2015.55015
Mohanad, M. K., Kostyk, V., Domin, D., Kostyk, K. (2016). Modeling of the case depth and surface hardness of steel during ion nitriding. Eastern-European Journal of Enterprise Technologies, 2/5 (80), 45–49. doi: 10.15587/1729-4061.2016.65454
Downloads
Published
Issue
Section
License
Copyright (c) 2016 Егор Павлович Дымко, Дмитрий Витальевич Мариненко, Сергей Владимирович Борисенко, Наталья Сергеевна Кравцова
This work is licensed under a Creative Commons Attribution 4.0 International License.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.
