Aerodynamic drag from two tubes in side-by-side arrangement for different tube shapes
DOI:
https://doi.org/10.15587/2313-8416.2016.71691Keywords:
tube, circular, drop-shaped, flat-oval, dumb-bell, aerodynamics, drag, investigation, comparisonAbstract
Experimental investigations of aerodynamic drag from two tubes in side-by-side arrangement for different tube shapes in the range of Reynolds numbers from 4000 to16000 are performed. Comparison of experimental data is executed. It is set, that the tubes of drop-shaped form have less aerodynamic drag and the tubes of flat-oval and dumb-bell forms have greater drag as compared to drag of circular tubes
References
Hasan, A. A. (2004). Thermal-hydraulic perfomance of oval tubes in a cross-flow of air. Heat and Mass Transfer, accepted for publication. ТHP 2004 by author and ТHP 2004 Springer-Verlag. By permission, 1–32.
Kondratyuk, V. A., Tuz, V. E., Terekh, A. M., Zhukova, Yu. V., Meyris, A. J. (2012). Aerodynamic drag of transversal-streamlined staggered bundles of flat-oval tubes. Eastern-European Journal of Enterprise Technologies, 3/8 (57), 39–42. Available at: http://journals.uran.ua/eejet/article/view/4074/3740
Terekh, M., Rudenko, A. I., Zhukova, Y. V. (2013). Aerodynamic drag to flows about single drop-like tubes and visualizaton of these flows. Journal of Engineering Physics and Thermophysics, 86 (2), 378–384. doi: 10.1007/s10891-013-0844-9
Pis’menyi, E. N., Kondratyuk, V. A., Zhukova, Y. V., Terekh, A. M. (2011). Convective heat exchange of cross-section-washed staggered packages of plainly-oval tubes. Eastern-European Journal of Enterprise Technologies, 2/8 (50), 4–8. Available at: http://journals.uran.ua/eejet/article/view/1829/1725
Terukazu, O., Hideya, N., Yukiyasu, T. (1984). Heat transfer and flow around an elliptic cylinder. International Journal of Heat and Mass Transfer, 27 (10), 1771–1779. doi: 10.1016/0017-9310(84)90159-5
Zhukova, Yu. V., Terekh, A. M., Semenyako, A. V. (2010). Aerodynamics and heat transfer of flat oval cylinder at the forced convection. Vol. 2. Moscow, 126–128.
Zhukauskas, A., Ziugzda, J. (1979). Heat transfer of cylinder in cross flow of fluid. Vilnius: Mokslas, 240.
Nouri-Borujerdi, A., Lavasani, A. M. (2007). Drag of a single non-circular cylinder. The Eighteenth International Symposium on Transport Phenomena. Daejeon, KOREA, 2104–2108.
Nouri-Borujerdi, A., Lavasani, A. M. (2006). Flow visualization around a non-circular tube. IJE Transactions B: Applications, 19 (1), 73–82.
Lavasani, A. M., Bayat, H. (2012). Heat transfer from two cam shaped cylinders in side-by-side arrangement. World Academy of Science, Engineering and Technology, 6 (7), 1298–1301.
Lavasani, A. M., Bayat, H. (2012). Flow around two cam shaped cylinders in tandem arrangement. World Academy of Science, Engineering and Technology, 6 (7), 1319–1322.
Terekh, A. M., Semenyako, A. V., Rudenko, A. I., Kondratyuk, V. A. (2014). Heat transfer of a single drop shaped cylinders in cross flow. Eastern-European Journal of Enterprise Technologies,1/8 (67), 27–31. Available at: http://journals.uran.ua/eejet/article/view/20066/19035
Kirpikov, V. A., Gutarev, V. V., Tsyrelman, N. M. (1969). Research of heat transfer and hydrodynamic drag of channel of type diffuzor-contractor. News of higher educational establishments. Energy, 9, 79–84.
Roshko, A. (1954). On the Drag and Frequency of Two-Dimensional Bluff Bodies. National Advisory Committee for Aeronautics. Technical Note 3169. California Institut of Technology, Washington, 29.
Downloads
Published
Issue
Section
License
Copyright (c) 2016 Олександр Михайлович Терех, Олександр Ігоревич Руденко, Юлія Володимирівна Жукова, Валерій Андрійович Рогачов, Олександр Володимирович Баранюк
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.