Artesian water supply control system in transient conditions
DOI:
https://doi.org/10.15587/2313-8416.2016.72698Keywords:
water supply system, optimum performance, maximum principle, Scada system, transfer functionAbstract
The paper describes an artesian water supply control system in the transition mode. The control system searches for the optimal performance trajectory of the water supply on the basis of a maximum return with a view to the fastest mode of stabilization. The analysis of artesian water supply control systems in transition mode and methods of improvement was conducted
References
Sidorenko, V., Buravchenko, K. O. (2015). Analysis of the causes pressure fluctuations in supply systems with a view to minimizing. Admiral Makarov National University of Shipbuilding, 28 (460), 113–117.
Buravchenko, K. (2016). Research and analysis of dynamics of pump unit control process. Technology audit and production reserves, 3/2 (29), 15–19. doi: 10.15587/2312-8372.2016.71878
Reca, J., Martínez, J., Gil, C., Baños, R. (2007). Application of Several Meta-Heuristic Techniques to the Optimization of Real Looped Water Distribution Networks. Water Resources Management, 22 (10), 1367–1379. doi: 10.1007/s11269-007-9230-8
Jung, D., Kang, D., Kang, M., Kim, B. (2014). Real-time pump scheduling for water transmission systems: Case study. KSCE Journal of Civil Engineering, 19 (7), 1987–1993. doi: 10.1007/s12205-014-0195-x
Araujo, L. S., Ramos, H., Coelho, S. T. (2006). Pressure Control for Leakage Minimisation in Water Distribution Systems Management. Water Resources Management, 20 (1), 133–149. doi: 10.1007/s11269-006-4635-3
Piratla, K. R., Ariaratnam, S. T. (2011). Criticality Analysis of Water Distribution Pipelines. Journal of Pipeline Systems Engineering and Practice, 2(3), 91–101. doi: 10.1061/(asce)ps.1949-1204.0000077
Cheremisin, M. M., Holod, A. V. (2012). Integrated automation of power based on modern SCADA systems. Cold Power and Electrical Complex automation of power based on modern SCADA Engineering. Bulletin of Vinnytsia Polytechnic Institute, 3, 128–131.
Leznov, B. S. (2006). Energy saving and regulated drive in pump and blower units. Moscow: Energoatomizdat, 360.
Petrosov, V. (2007). Water Resistance. Kharkiv: Factor, 360.
Boltyanskii, V. G. (1968). Mathematical methods of optimal control. Moscow: Nauka, 408.
Downloads
Published
Issue
Section
License
Copyright (c) 2016 Костянтин Олегович Буравченко
This work is licensed under a Creative Commons Attribution 4.0 International License.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.