A method of producing iron castings with a working wear and viscous mounting parts for use in conditions of impact-abrasive wear
DOI:
https://doi.org/10.15587/2313-8416.2016.74469Keywords:
method, casting, chilled cast iron, ductile cast iron, hardness, wear resistance, toughness, impact resistanceAbstract
The work proposed and investigated a method for producing castings with working hard wear-resistant surface of the chilled cast iron and the mounting portion of the viscous shock-resistant high-strength ductile cast iron melt from a single source, which are designed to work in conditions of impact-abrasive wear. Given technological process conditions provide the structure and differentiation properties in iron castings section walls up to 50 mm
References
49-Census of World casting production (2015). Modern casting, 26–31.
Aleksandrov, N. N., Beh, N. I., Nuraliev, F. A., Radchenko, M. V. (2015). Sovremennye konstrukcionnye materialy – kljuch k uskorennoj modernizacii predprijatij. Litejnoe proizvodstvo, 10, 6–12.
Hudokormov, D. N. (1987). Proizvodstvo otlivok iz chuguna. Minsk: Vyshjejshaja shkola, 197.
Smirnov, M. Ju. (2015). Issledovanie litejnogo proizvodstva stran Skandinavii na primere otlivok nasosov. Litejnoe proizvodstvo, 6, 36–39.
Eparhin, O. M., Alov, V. A., Popkov, A. N., Mel'nikov, A. P., Karpenko, M. I., Homec, U. S. (2015). Povyshenie kachestva lityh iznosostojkih detalej. Litejnoe proizvodstvo, 5, 2–5.
Fesenko, M. A., Fesenko, A. M., Kosjachkov, V. A. (2010). Vnutriformennoe modificirovanie dlja poluchenija chugunnyh otlivok s differencirovannymi strukturoj i svojstvami. Litejnoe proizvodstvo, 1, 7–13.
Fesenko, E. V., Jamshinskij, M. M., Fesenko, M. A. (2016). Novyj sposob poluchenija dvuhslojnyh otlivok s iznosostojkoj rabochej poverhnost'ju i vjazkoj udarostojkoj serdcevinoj. Metallurgija mashinostroenija, 1, 30–33.
Garber, M. E. (2010). Iznosostojkie belye chuguny: svojstva, struktura, tehnologija, jekspluatacija. Moscow: Mashinostroenie, 280.
Bublikov, V. B. (2008). Vysokoprochnomu chugunu – 60. Litejnoe proizvodstvo, 11, 2–8.
Kostenko, G. D., Pelikan, O. A., Kostenko, D. G. (1998). Iznosostojkie bimetallicheskie otlivki na osnove splavov zheleza. Metall i lit'e Ukrainy, 9-10, 30–33.
Fesenko, A. N., Fesenko, M. A., Korsun, V. A., Mis'ko, V. K. (2016). Poluchenie dvuhslojnyh olivok iz bazovogo rasplava chuguna sposobom promyvki. Vіsnik DDMA, 1 (37), 96–100.
Zhizhkina, N. A. (2009). Issledovanie kachestva rabochego sloja prokatnyh valkov. Vіsnik KDPU іm. M. Ostrograds'kogo, 4/2009 (57), 72–75.
Hrychikov, V. E., Menjajlo, E. V., Mushenkov, Ju. A., Jakimova, D. V. (2012). Osobennosti processa obrazovanija usadochnoj poristosti v bochke chugunnogo prokatnogo valka. Metallurgicheskaja i gornorudnaja promyshlennost', 6, 35–40.
Gushhin, N. S., Kulikov, V. N., Nuraliev, F. A., Tahirov, V. A. (2015). Iznosostojkie legirovannye hromom chuguny so special'nymi svojstvami. Litejnoe proizvodstvo, 4, 7–11.
Downloads
Published
Issue
Section
License
Copyright (c) 2016 Максим Анатолійович Фесенко, Іван Віталійович Лукяненко, Іван Віталійович Лукяненко, Катерина Валеріївна Фесенко, Катерина Валеріївна Фесенко, Анатолій Михайлович Верховлюк, Анатолій Михайлович Верховлюк
This work is licensed under a Creative Commons Attribution 4.0 International License.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.
