Strength analysis of spiral pipe with equalincreased surface with regard to internal flow
DOI:
https://doi.org/10.15587/2313-8416.2017.92832Keywords:
heat transfer, spiral pipe, equalincreased surface, forced convection, strength, three roller rolling technologyAbstract
Strength analysis of brass spiral pipe with equalincreased surface at the internal air flow by means of CFD modeling is carried out. The aim is to determine the optimal geometric characteristics of spiral pipes that will be used to generate the heat exchanger. CFD modeling data verification is carried out using a comparison with the test object known from the literature
References
Pis’mennyi, E. N. (2012). Ways for improving the tubular heaters used in gas turbine units. Thermal Engineering, 59 (6), 485–490. doi: 10.1134/s0040601512060080
Pis’mennyi, E. N., Rogachev, V. A., Terekh, A. M., Konshin, V. І., Omelchuk, D. S. (2013). Heat transfer of tube bundles with equally increased surface. Eastern-European Journal of Enterprise Technologies, 1 (8 (61)), 29–33. Available at: http://journals.uran.ua/eejet/article/view/9423/8184
Reva, S. A., Rogachev, V. A., Terekh, A. M., Alforova, O. V. (2013). Heat transfer of few row bundles of screw-shaped tubes. Eastern-European Journal of Enterprise Technologies, 3 (8 (63)), 54–56. Available at: http://journals.uran.ua/eejet/article/view/14837/12639
Mel'nyk, V. S., Bobyr, M. I., Procenko, P. Ju., Makovej, V. O. (2015). Pat. No. 102107 UA. Sposib profiljuvannja gvyntopodibnyh trub. MPK: B21D 15/04. No. u201505016; declareted: 22.05.2015; published 12.10.2015, Bul. No. 19.
Macovei, V., Protsenko, Yu. (2013). Osoblivostі profіlyuvannya one that trohzahіdnih gvintopodіbnih pipes. Bulletin of the NTU "KPI", 43, 153–162.
Bystrov, Y. A., Isaev, S. A., Kudryavtsev, N. A., Leontiev, A. I. (2005). Numerical simulation of heat transfer enhancement in the vortex bags pipes. Saint Petersburg: Shipbuilding, 392.
Isachenko, V. P., Osipova, V. A., Sukomel, A. S. (1975). Teploperedacha. Moscow: Energy, 488.
Kalinin, E. K., Dreitser, G. A., Kopp, I. Z., Myakochin, A. S. (1998). Efficient heat exchange surface. Moscow: Energoatomisdat, 408.
Trubachev, S., Yakhno, B. (2013). Stress-strain of the cylindrical walled perforated shells. Journal of Mechanical Engineering the NTUU "KPI", 67, 126–130.
Trubachev, S., Alekseychuk, O. (2015). The strength сalculation of energy systems pipelines with bends by finite element method. Information systems, mechanics and control, 12, 94–98.
Downloads
Published
Issue
Section
License
Copyright (c) 2017 Сергій Іванович Трубачев, Олександр Володимирович Баранюк, Сергій Анатолійович Рева
This work is licensed under a Creative Commons Attribution 4.0 International License.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.
