Research of hydrodynamics processes in the evaporator with forced circulation and boiling of solution in pipes

Authors

DOI:

https://doi.org/10.15587/2313-8416.2017.97799

Keywords:

evaporator, separator, vapor-liquid mixture, vapor content, vacuum regime, circulation rate

Abstract

The work is devoted to research and intensification of the process of boiling of solutions with different viscosities in evaporators of a tubular type with forced circulation and a drift boiling zone. The main factors that influence the change in the hydraulic resistance of the heating chamber under various operating conditions and the dependence of the loss on vapor content are determined on the developed laboratory device. The optimum value of the circulation velocity of the working solution at various temperatures and the boiling zones is also found in the article

Author Biographies

Vilimin Mihaylichenko, National Technical University “Kharkiv Polytechnic Institute” Kyrpychova str., 2, Kharkiv, Ukraine, 61002

PhD, Associate professor

Department of chemical technique and industrial ecology

Tetiana Novozhylova, National Technical University “Kharkiv Polytechnic Institute” Kyrpychova str., 2, Kharkiv, Ukraine, 61002

Associate professor

Department of chemical technique and industrial ecology

Dmytro Nechyporenko, National Technical University “Kharkiv Polytechnic Institute” Kyrpychova str., 2, Kharkiv, Ukraine, 61002

PhD, Associate professor

Department of chemical technique and industrial ecology

Inna Pitak, National Technical University “Kharkiv Polytechnic Institute” Kyrpychova str., 2, Kharkiv, Ukraine, 61002

PhD, Associate professor

Department of chemical technique and industrial ecology

References

Kutateladze, S. S. (1979). Osnovyi teorii teploobmena. Moscow: Atomizdat, 416.

Fokin, V. S., Danilov, D. Yu., Nechiporenko, D. I. (2008). Issledovanie protsessa kipeniya rastvora v schelevyih kanalah greyuschey kameryi vyiparnogo apparata. Integrirovannyie tehnologii i energosberezhenie, 3, 16–20.

Nechiporenko, D. I., Panasenko, V. A., Novozhilova, T. B. (2010). Issledovanie protsessa kipeniya rastvorov v razbornoy shirokokanalnoy plastinchatoy greyuschey kamere vyiparnogo apparata. Trudyi NIOHIM, 76, 107–112.

Tong, L. S. (1969). Teplootdacha pri kipenii i dvuhfaznoe techenie. Moscow: Mir, 344.

Danilov, Yu. B. (2008). Nauchno-prakticheskie osnovyi sozdaniya energosberegayuschego teploobmennogo i vyiparnogo oborudovaniya neftehimicheskogo kompleksa Ukrainyi. Kharkiv, 376.

Mineev, Yu. V. (2007). Gidrodinamika i teploobmen pri kipenii smesevogo holodilnogo agenta R407C vnutri trubyi s lentochnyimi turbulizatorami. Astrakhan, 205.

Apparatyi i mashinyi kislorodnyih ustanovok (1963). Moscow: Mashinostroenie, 6, 183.

Fokin, V. S., Koshel'nik, V. M., Koshel'nik, A. V., Zbaraz, L. I., Danilov, D. Yu. (2003). Metodika opredeleniya parosoderzhaniya smesi na vyihode iz plastinchatogo isparitelya sistemyi teplosnabzheniya. Kommunalnoe hozyaystvo gorodov, 47, 168–171.

Golovchenko, O. A., Fokin, B. C., Marchenko, L. N., Aksel'rod, L. S. (1977). K raschetu razmerov zonyi razvitogo kipeniya v vyiparnyih apparatah normalizovannoy konstruktsii. Himicheskoe mashinostroenie vyipusk, 77, 36–40.

Kutepov, A. M., Sterman, L. S., Styushin, N. G. (1977). Gidrodinamika i teploobmen pri paroobrazovanii. Moscow: Vyisshaya shkola, 448.

Published

2017-04-21

Issue

Section

Technical Sciences