Hydraulic calculation of the circulation unit of the apparatus with jet-injection filling

Authors

DOI:

https://doi.org/10.15587/2313-8416.2018.127527

Keywords:

jet-injection apparatus, hydraulic

Abstract

Hydraulic calculation of the circulation unit of the appatatus with jet-injection gas filling is considered. Equations of the circulation unit of the apparatus with jet injection gas filling for the gas phase suspension regime along the height of the diplegs are obtained. The equation of the coefficient of hydraulic resistance of the circulation unit is obtained, and a method is developed for selecting a mixing device to overcome the hydraulic resistance in the circulation unit and gas filling of the diplegs

Author Biographies

Viktor Ved, Ukrainian State University of Chemical Technology Gagarina ave., 8, Dnipro, Ukraine, 49005

Senior Lecturer

Department of equipment of chemical plants

Valeriy Nikolsky, Ukrainian State University of Chemical Technology Gagarina ave., 8, Dnipro, Ukraine, 49005

Doctor of Technical Sciences, Professor

Department of Energetic

References

Sokolov, V. N., YAblokova, M. A. (1988). Apparatura mikrobiologicheskoy promyshlennosti. L.: Mashinostroenie. Leningr. otd-nie, 278.

Sivenkov, A. V. (2011). Intensifikatsiya gidrodinamicheskikh protsessov v struynykh apparatakh pishchevoy promyshlennosti. Sankt-Peterburg, 16.

Sivenkov, A. V., Novoselov, A. G. (2008). Gidrodinamicheskiy raschet dvizheniya dvukhfaznykh potokov v vertikal'nykh trubakh kozhukhotrubnogo struyno-inzhektsionnogo apparata (KSIA) protochnogo tipa s dopolnitel'nym soplom nad slivom (CHast' 1). Izvestiya SPbGUNiPT, 2, 6–10.

Sivenkov, A. V., Novoselov, A. G. (2008). Gidrodinamicheskiy raschet dvizheniya dvukhfaznykh potokov v vertikal'nykh trubakh kozhukhotrubnogo struyno-inzhektsionnogo apparata (KSIA) protochnogo tipa s dopolnitel'nym soplom nad slivom (CHast' 2). Izvestiya SPbGUNiPT, 2, 11–16.

Ved', V. V. (2013). Struktura gazorіdinnogo potoku ta rezhimi roboti tsirkulyatsіynogo aparatu zі strumenevo-іnzhektsіynim gazo napovnennyam. Vopr. khimii i khim. tekhnologii, 3, 214–219.

Agaev, K. E. (2012). Sovershenstvovanie gidrodinamicheskikh protsessov obrabotki pishchevogo syr'ya v kozhukhotrubnom struyno-inzhektsionnom apparate. SPbGUNiPT. Sankt-Peterburg, 16.

Sokolov, V. N., Domanskiy, I. V. (1976). Gazozhidkostnye reaktory. L.: Mashinostroenie, 216.

Reykhsfel'd, V. O., Erkova, L. N. (1974). Oborudovanie proizvodstv osnovnogo organicheskogo sinteza i sinteticheskikh kauchukov. L.: KHimiya, 440.

Idel'chik, I. E. (1983). Aerogidrodinamika tekhnologicheskikh apparatov. Moscow: Mashinostroenie, 351.

Ved', V. V. (2015). Aparat dlya kontaktuvannya gazu ta rіdini. pat. na korisnu model' № 99747 Ukraini, MPK6 B01F 5/10. declared: 05.12.2014; published: 25.06.2015, No. u201413052; byul. No. 12/2015.

Downloads

Published

2018-04-02

Issue

No. 3 (2018)

Section

Technical Sciences

License

Copyright (c) 2018 Viktor Ved, Valeriy Nikolsky

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.

Authors, who are published in this journal, agree to the following conditions:

1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.

 2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.