Simulation of the collecting process in a cyclone apparatus of a new design
DOI:
https://doi.org/10.15587/2313-8416.2018.146844Keywords:
dust collector, polydisperse dust, apparatus, air purification, cyclone, separator, solid particleAbstract
The proposed cyclone significantly increases the efficiency of the dust-collecting of the composite contamination, which consists of the solid particles and the water vapor, and contributes to decreasing of temperature in the apparatus.
A literary review is carried out and it is determined that it was previously investigated and that the authors did not investigate collective trapping. Dust samples are collected and the fractional composition is determined
References
Kasatkin, A. G. (1961). Osnovnye protsessy i apparaty khimicheskoy tekhnologii. Moscow, 829.
Ganegama Bogodage, S., Leung, A. Y. T. (2016). Improvements of the cyclone separator performance by down-comer tubes. Journal of Hazardous Materials, 311, 100–114. doi: http://doi.org/10.1016/j.jhazmat.2016.02.072
Huang, A.-N., Ito, K., Fukasawa, T., Fukui, K., Kuo, H.-P. (2018). Effects of particle mass loading on the hydrodynamics and separation efficiency of a cyclone separator. Journal of the Taiwan Institute of Chemical Engineers, 90, 61–67. doi: http://doi.org/10.1016/j.jtice.2017.12.016
Luciano, R. D., Silva, B. L., Rosa, L. M., Meier, H. F. (2018). Multi-objective optimization of cyclone separators in series based on computational fluid dynamics. Powder Technology, 325, 452–466. doi: http://doi.org/10.1016/j.powtec.2017.11.043
Antonets, I. V. (2016). Modeliuvannia protsesiv perenosu u tryfazovykh polidyspersnykh potokakh stosovno do mokroi ochystky haziv vid tverdykh chastynok. Kyiv: Instytut Vuhilnykh Enerhotekhnolohii, 141.
Dubrovskyi, V. V., Pidvysotskyi, O. M., Shraiber, O. A. (2011). Do vyznachennia efektyvnosti ulovliuvannia chastynok letkoi zoly krapliamy. Problemy zahalnoi enerhetyky, 3 (26), 45–49.
Ryzhkov, S. S., Oshchyp, O. V. (2011). Intensyfikatsiia osadzhennia vysokodyspersnykh chastynok u labiryntnomu separatori za rakhunok termoforetychnykh efektiv. Zbirnyk naukovykh prats NUK, 4, 99–107.
Sheliukh, Yu. Ye. (2012). Suchasni metody ochyshchennia povitria vid promyslovykh vydiv pylu. Visnyk LDU BZhD, 6, 214–218.
Rizhkov, S. S., Pastukhov, S. Yu. (2010). Chislennoe modelirovanie osazhdeniya vysokodispersnykh chastits v protochnoy chasti separatsionnogo oborudovaniya. Elektronniy Vіsnik NUK, 3. URL: http://evn.nuos.edu.ua/article/download/24952/22404
Radchenko, R. N., Radchenko, N. І., Khlopenko, N. Ya. (2011). Otsenka effektivnosti okhlazhdeniya vozdukha na vkhode glavnogo dvigatelya transportnogo sudna zabortnoy vodoy i ezhektornoy kholodil'noy mashinoy, zbіrnik naukovikh prats' NUK, 4. Available at: http://jnn.nuos.edu.ua/article/download/25590/23057
Novodvors'kiy, V. V., Stepanyuk, A. R. (2018). Tsiklon. No. u201807571; declareted: 06.07.2018.
Shved, M. P., Stepaniuk, A. R. (2017). Doslidzhennia reolohichnykh vlastyvostei rozchyniv polimeriv. Kyiv: KPI im. Ihoria Sikorskoho, 17.
Downloads
Published
Issue
Section
License
Copyright (c) 2018 Volodymyr Novodvorskyi, Andrii Stepaniuk
This work is licensed under a Creative Commons Attribution 4.0 International License.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.