Model of structural-topological synthesis of gas extraction quality monitoring system

Authors

  • Леонид Иванович Нефедов Kharkiv National Automobile and Highway University street Petrovskogo 25, Kharkiv, Ukraine, 61002, Ukraine
  • Мария Валерьевна Шевченко Kharkiv National Automobile and Highway University Petrovskogo, 25, Kharkov, Ukraine, 61002, Ukraine
  • Ольга Николаевна Кудырко Kharkiv National Automobile and Highway University Petrovskogo, 25, Kharkov, Ukraine, 61002, Ukraine

DOI:

https://doi.org/10.15587/2313-8416.2014.27269

Keywords:

gas extraction, monitoring, quality, model, synthesis, geographically distributed, structural - topological

Abstract

In the article the structural-topological synthesis model of geographically distributed gas extraction monitoring system has been developed. The developed model is representative of the multi-level centralized of gas production monitoring system from the bottom hole to the gasholder by many criteria.

Author Biographies

Леонид Иванович Нефедов, Kharkiv National Automobile and Highway University street Petrovskogo 25, Kharkiv, Ukraine, 61002

Doctor of Technical Science, Professor

Department of Automation and Computer-Integrated Technologies

Мария Валерьевна Шевченко, Kharkiv National Automobile and Highway University Petrovskogo, 25, Kharkov, Ukraine, 61002

Associate Professor, Candidate of Sciences

Department of  automation and computer-integrated technologies

Ольга Николаевна Кудырко, Kharkiv National Automobile and Highway University Petrovskogo, 25, Kharkov, Ukraine, 61002

Doctoral Student

Department of  automation and computer-integrated technologies

References

Systemy upravlinnia yakistiu. Vymohy (ISO 9001:2008, IDT): DSTU ISO 9001-2009 [Quality management systems – Requirements] (2009). Kyiv: Derzhspozhyvstandart Ukrainy, 26. Natsionalnyi standart Ukrainy [in Ukraine].

Vyakhirev, R. I., Korotaev, Yu. P., Kabanov, N. I. (1998). Teoriia i opyt dobychi gaza. Мoskow: ОАО Izdatelstvo Nedra, 479.

Motalo, A. V. (2008) Kompleksne otsiniuvannia якості yakosti prirodnogo gazu yak energonosiia. Visnyk NU “Lvivska politekhnika”, 608, 137–142.

Motalo, A. (2008) Aktualni zadachi metrologichnogo zabezpechennia vymiriuvannia pokaznykiv yakosti prirodnogo gazu. Vymiriuvalna tekhnika ta metrologiia, 68, 195–198.

Nefedov, L. I., Shevchenko, A. A. (2008). Modeli organizatsii monitoringa otsenki kachestva biznes-protsessa transporta gaza na kompressornoy stantsii. Vestnik NTU “HPI” [Bulletin NTU “HPI”], 24, 94–98.

Gura, L. O. (2006). Gazoperekachuvalni stantsii

magistralnykh gazoprovodiv. Kharkiv, NTU “HPI”, 181.

Plotnikov, V. M., Podreshetnikov, V. A., Goncharov, V. U. (1985). Sredstva kontrolia i avtomatizatsii obyektov transporta gaza. Leningrad, USSR: Nedra, 217.

Andreyev, Ye. B., Kliuchnikov, A. I., Krotov, A. V., Popadko, V. Ye., Sharova, I. Ya. (2008). Avtomatizatsiya tekhnologacheskikh protsessov dobychi i podgotovki nefti i gaza. Мoskow: ООО Nedra-Biznestsentr, 399.

Mirzadzhanzade, A. Kh., Kuznetsov, O. L., Basniev, K. S., Aliev, Z. S. (2003). Osnovy tekhnologii dobychi gaza. Мoskow: ОАО Izdatelstvo Nedra, 880.

Petrov, E. G., Pisklakova, B. P., Beskorovaynyy, V. V. (1992). Territorialno raspredelennye sistemy obsluzhivaniya. Kyiv: Tekhnika, 208.

Nefedov, L., Shevchenko, M., Kudyrko, O. (2014). Obobshchennaia model sinteza sistemy monitoringa kachestva dobychi, pererabotki i transporta gaza. Scientific Journal “ScienceRise”, 1, 7–18.

Published

2014-09-16

Issue

Section

Technical Sciences