Justification of the parameters of vertical milling adapter for strip tillage
DOI:
https://doi.org/10.15587/2313-8416.2014.27275Keywords:
strip-till, vertical milling adapter, optimization of the parameters, indicators of qualityAbstract
The feasibility of using strip-till technology in the forest-steppe zone of Ukraine is grounded in the article. Promising areas for improvement tools for strip-till technology were determined.
The optimal kinematic mode of operation and the number of work items have been identified for the proposed technical solutions vertical milling adapter. Optimal parameters in accordance with the indicators of quality of work defined by the results of experimental study.References
Pastukhov, V. I. (2002). Quality mechanized manufacturing operations and biopotential field Worship. Kharkiv: Morning, 124.
Antonets, S. S., Antonets, A. S., Pisarenko, V. M. et al (2010). Organic farming: Experiences with "Agroecology" Shishatsky Poltava region. Poltava: RIO PDAA, 200.
Kushnarev, A. A. (2009). New look at tillage. Doslіdnitske, 13 (27), book 2, 15–28.
Tarasenko, B. I. (1979). Density addition arable layer and productivity of agricultural crops in the Kuban chernozem. Pochvovedenye, 8, 54–60.
Kushnarev, A. S. (1989). Mechanics and technological bases of tillage. Kyiv: Vintage, 138.
Spirin, A. P. (1998). Energy saving techniques subsurface tillage. Technology in agriculture, 4, 20–23.
Buga, V. G. (1990). Band furrow sowing soybean. Mechanization and electrification of socialist agriculture, 4, 19–20.
Goryachkin, V. P. (1965). Collected Works. Volume One. Moscow, USSA: Kolos, 714.
Panov, I. M. (1987). Prospects for the development of structures tillage machines and implements. Mechanization and electrification of agriculture, 3, 13–16.
Kanarev, F. M. (1983). Rotary tillage machines and implements. Mosscow, USSA: Mechanical Engineering, 142.
Sinieokov, G. N. (1977). Theory and calculation of tillers. Mosscow, USSA: Mechanical Engineering, 312.
Matyashin, Y. I., Matyashin, N. Y., Matyashin, A. N. (2008). Herald MSAU, 3, 46–51.
Kiselev, S. N., Perevozchikova, N. V. (2008). Rotary machines in organic farming. Herald MSAU. Series: Technology agribusiness, 2, 67–69.
Kravchuk, V. I., Pogorilyy, V. V., Shustik, L. P. (2008). Scientific and technical engineering expertise and technological solutions for cultivation. Kyiv: Phoenix, 50.
Burchenko, P. N. (1973). Principles for creating combined units for the cultivation of agricultural cultures on the basis of passive working bodies. Works VIM, T. 63-M.: VIM-151, 151.
Wilde, A. A. (1986). Combined tillage machines. Leningrad, USSA: Agropromizdat, 128.
7 Prasolov, E. Y., Bielovol, Yu. Yu. (2012) .Analysis tools to perform pre-processing. Collected Works of Vinnytsia National Agrarian University. Series: Engineering. Vinnitsa, 11, 2 (33), 245–250.
Downloads
Published
Issue
Section
License
Copyright (c) 2014 Юрий Юрійович Бєловол
This work is licensed under a Creative Commons Attribution 4.0 International License.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.
