Development of load calculation techniques on screw and screw press energy consumption
DOI:
https://doi.org/10.15587/2313-8416.2015.44378Keywords:
screw press, briquetting, load calculation, pressing zones, unit cost of energyAbstract
The process of pressing of wood chips in screw machines is researched. It is defined processes taking place in different parts of the screw, formulas allowing to calculate the loads acting on the screw flights, as well as to determine the power required for compression. The unit costs of energy consumption and raw materials in the degree of heat pressing are determined
References
Renewables Global status report: 2007 (2007). Renewable Energy Policy Network for the 21st Century. Available at: https://web.archive.org/web/20090611211442/http://www.ren21.net/pdf/RE2007_Global_Status_Report.pdf
Renewables Global status report: 2014 (2014). Renewable Energy Policy Network for the 21st Century. Available at: http://www.ren21.net/Portals/0/documents/Resources/GSR/2014/GSR2014_full%20report_low%20res.pdf
Kryzhanovskij, V. K., Kerber, M. L., Burlov, V. V. (2008). Proizvodstvo izdelij iz polimernyh materialov. First edition. SPb: Professija, 464.
Koshevoj, E. P. (2001). Tehnologicheskoe oborudovanie predprijatij proizvodstva rastitel'nyh masel. Spb: GIORD, 368.
Chebaevskij, V. F., Vishnevskij, K. P. et. al. (1989). Nasosy i nasosnye stancii. Moscow: Agropromizdat, 416.
Gerrman, H.; Fridman, L. M. (Ed.) (1975). Shnekovye mashiny v tehnologii. FRG. Lviv: "Himija".
Skakun, V. A. (1970). Vintovye kompressory. Lviv: Mashinostroenie, 400.
Sokolov, M. V., Klinkov, A. S., Efremov, O. V., Beljaev, P. S., Odnol'ko, V. G. (2004). Avtomatizirovannoe proektirovanie i raschet shnekovyh mashin. Moscow: Mashinostroenie-1, 248.
Mak-Kelvi, D. M. (1965). Pererabotka polimerov. Moscow: Himija, 444.
Gomonaj, M. V. (2006). Tehnologija izgotovlenija toplivnyh briketov (biotoplivo). Shpindel', 1.
Zavinskij, S. I. (2012). Vlijanie davlenija pressovanija i temperatury na svojstva briketov iz drevesnoj struzhki. Vestnik Nacional'nogo tehnicheskogo universiteta "HPI", 10.
Troshin, A. G., Moiseev, V. F., Tel'nov, I. A., Zavinskij, S. I. (2010). Development of processes and equipment for manufacture of fuel briquettes from the biomass. Eastern-European Journal of Enterprise Technologies, 3/8 (45), 36–40. Available at: http://journals.uran.ua/eejet/article/view/2874/2677
Downloads
Published
Issue
Section
License
Copyright (c) 2015 Алексей Георгиевич Трошин, Сергей Иванович Завинский, Максим Сергеевич Татарьянц
This work is licensed under a Creative Commons Attribution 4.0 International License.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.
