Experimental researches of the hybrid Rayleigh step bearing
DOI:
https://doi.org/10.15587/2313-8416.2016.64109Keywords:
experimental researches, hybrid Rayleigh step bearing, experimental facility, sensors taringAbstract
The experimental researches for hybrid Rayleigh step bearing at the different regimes of exploitation are investigated. Comparative analysis and the analysis of test data with theoretical calculations of the bearing static characteristics on the basis of thermohydrodynamic lubrication equalizations were carried out. The fundamental aspects of the test, concerning to hybrid bearing, the test procedure at the experimental facility, installed sensors taring, controlling and reading are determined
References
Uchaev, P. N., Orlov, P. I. (Eds.) (1988). Osnovy konstruirovanija. Spravochno-metodicheskoe posobie. V 2-h kn. Kn. 2. Moscow: Mashinostroenie, 544.
Stachowiak, G. W., Batchelor, A. W. (2013). Engineering tribology. Elsevier Butterworth – Heinemann, 896.
Szeri, A. Z. (2011). Fluid Film Lubrication. Cambridge University Press, 564.
Voskresenskij, V. A., D'jakov, V. I. (1980). Raschet i proektirovanie opor skol'zhenija (zhidkostnaja smazka). Moscow: Mashinostroenie, 224.
Tokar', I. Ja. (1971). Proektirovanie i raschet opor trenija. Moscow: Mashinostroenie, 168.
Dowson, D., Taylor, C. M., Godet, M., Berthe, D. (Eds.) (1987). Fluid – film lubrication – Osborne Reynolds centenary. Elsevier Science Publishers B. V., 696.
Rowe, W. B. (1983). Hydrostatic and hybrid bearing design. Butterworths & Co. Ltd, 254.
Hlopenko, N. Ja., Koshkin, D. L. (2003). Jeksperimental'nye issledovanija opytnogo obrazca podshipnika Kingsberi pri torcovyh bienijah grebnja. Problemi tribologіi, 1, 57–61.
Etsion, I., Halperin, G., Brizmer, V., Kligerman, Y. (2004). Experimental Investigation of Laser Surface Textured Parallel Thrust Bearings. Tribology Letters, 17 (2), 295–300. doi: 10.1023/b:tril.0000032467.88800.59
Zhou, J., Blair, B., Argires, J., Pitsch, D. (2015). Experimental Performance Study of a High Speed Oil Lubricated Polymer Thrust Bearing. Lubricants, 3 (1), 3–13. doi: 10.3390/lubricants3010003
Mikula, A. M. (1988). Further Test Results of the Leading-Edge-Groove (LEG) Tilting Pad Thrust Bearing. Journal of Tribology, 110 (1), 174. doi: 10.1115/1.3261559
Wasilczuk, M. (2015). Friction and Lubrication of Large Tilting-Pad Thrust Bearings. Lubricants, 3 (2), 164–180. doi: 10.3390/lubricants3020164
Patil, A., Shinde, P. B., Chavan, S. P. (2012). Experimental studies of pressure distribution in tilting pad trust bearing with single continuous surface profiled sector shaped pads. International Journal of Applied Research in Mechanical Engineering (IJARME), 2 (2), 112–116.
Uilkok, U. (1970). Povyshenie dolgovechnosti ustanovok s podshipnikami kachenija blagodarja ispol'zovaniju kombinirovannogo podshipnika. Problemy trenija i smazki: Tr. Amer. o-va inzh.-meh. Moscow: Mir, 3, 34–42.
Hlopenko, N. Ja., Sorokina, T. N. (2013). Turbulentnaja neizotermicheskaja smazka stupenchatogo podpjatnika Rjeleja. Problemi tribologіi, 4, 40–45.
Hlopenko, N. Ja., Sorokina, T. N. (2015). Raznostnye shemy i tochnost' reshenija termogidrodinamicheskih uravnenij smazki podpjatnika Rjeleja. Problemi tribologіi, 2, 101–106.
Sorokina, T. N. (2015). Opisanie jeksperimental'noj ustanovki dlja issledovanija gidrostatodinamicheskogo podpjatnika s karmanami Rjeleja. Vіsnik NTU "HPІ". Serіja: Mehanіko-tehnologіchnі sistemi ta kompleksi, 36 (1145), 88–91.
Downloads
Published
Issue
Section
License
Copyright (c) 2016 Татьяна Николаевна Сорокина
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.