Application of liquid glass mixtures with reduced content of liquide glass as a factor in improving the quality of machine-building castings
DOI:
https://doi.org/10.15587/2313-8416.2016.69836Keywords:
liquid glass, molding sand, computer-integrated technology, ridge analysisAbstract
Possibilities of substitution of molding sand with conventional amounts of liquid glass as binder by mixtures with a low content of liquid glass are studied. The possible variants of formulations are analyzed and physical and mechanical properties of mixtures are simulated. In the example of optimization of mixture composition of liquid glass with a high-performance hardener it is shown that the optimum composition of molding sand can be found using a ridge analysis of mathematical models " composition – properties"
References
Aljohin, V. I., Belogub, A. V., Marchenko, A. P., Akimov, O. V. (2010). Modelirovanie litejnyh processov pri izgotovlenii avtomobil'nyh porshnej. Cvetnye metally. Moscow, 8, 81–83.
Aljohin, V. I., Belogub, A. V., Marchenko, A. P., Akimov, O. V. (2009). Komp'juterno-integrirovannoe modelirovanie litejnyh processov v avtomobil'nyh porshnjah na osnove konstruktorsko-tehnologicheskoj metodiki proektirovanija detalej DVS. Dvigateli vnutrennego sgoranija. Kharkov: NTU «HPI», 2, 101–104.
Akimov, O. V., Marchenko, A. P. (2008). Jeksperimental'nye issledovanija i komp'juternoe modelirovanie materialov dlja blok-kartera DVS. Eastern-european journal of enterprise technologies, 5/1 (35), 52–57. Available at: http://www.nbuv.gov.ua/old_jrn/natural/Vejpt/2008_5_1/EEJET_5_1_2008_52-57.pdf
Krasnokutskij, E. A. (2012). The simulation of crystallization in a metal mold cast parts. Technology audit and production reserves, 1/1 (3), 3–8. Available at: http://journals.uran.ua/tarp/article/view/4867/4518
Ponomarenko, O. I., Trenjov, N. S. (2013). Computer modeling of crystallization processes as a reserve of improving the quality of pistons of ice. Technology audit and production reserves, 6/2 (14), 36–40. Available at: http://journals.uran.ua/tarp/article/view/19529/17205
Savchenko, Ju. (2012). Use of computer-integrated systems and technology in the production of pistons. Technology audit and production reserves, 1/1 (3), 8–13. Available at: http://journals.uran.ua/tarp/article/view/4868/4519
Akimov, O. V. (2003). Analiz pogreshnostej formoobrazovanija otlivok koles turbin turbokompressorov dlja nadduva DVS na jetape izgotovlenija ih voskovyh modelej. Eastern-european journal of enterprise technologies, 3, 16–24.
Akimov, O. V., Anackij, Ju. P., Soloshenko, V. A. (1999). Analiz sobstvennyh kolebanij otlivki blok-kartera dizelja “SMD”. Vestnik Har'kovskogo gosudarstvennogo politehnicheskogo universiteta. Kharkov: HGPU, 66, 40–47.
Horoshilov, O. N., Ponomarenko, O. I. (2006). Issledovanie konstrukcionnyh harakteristik srezov na dorne pri proizvodstve polyh zagotovok iz cvetnyh splavov. Lit'e i metallurgija, 2, 187–189.
Kostyk, K. O. (2013). Zmicnennja pres-form lyttja pid tyskom po nanotehnologii'. Mashynobuduvannja, 12, 113–118.
Evtushenko, N. S., Shinskij, O. I., Ponomarenko, O. I. (2013). Issledovanie svojstv regeneriruemyh smesej na osnove OFOS. Kompressornoe i jenergeticheskoe mashinostroenie, 4, 48–51.
Berlizeva, T. V., Ponomarenko, O. I., Karateev, A. M., Litvinov, D. A. (2013). Vlijanie furfuriloksipropilciklokarbonatov (FOPCK) s razlichnymi dobavkami na svojstva holodnotverdejushhih smesej na zhidkom stekle. Kompressornoe i jenergeticheskoe mashinostroenie, 3, 26–29.
Djomina, E. B. (2011). Optimal strategy with technical re-manufacture of basic metals. Technology audit and production reserves, 2/2 (2), 40–52. Available at: http://journals.uran.ua/tarp/article/view/4866/4517
Ponomarenko, O. I., Evtushenko, N. S., Berlizeva, T. V. (2011). Vlijanie zhidkih otverditelej s raznymi dobavkami na svojstva zhidkostekol'nyh smesej. Litejnoe proizvodstvo, 4, 21–24.
Kovalenko, B. P., Djomin, D. A., Bozhko, A. B. (2006). Optimizacija sostava holodnotverdejushhih smesej (HTS) s propilenkarbonatom. Eastern-european journal of enterprise technologies, 6/1 (18), 59–61. Available at: http://www.nbuv.gov.ua/old_jrn/natural/vejpt/2005_6_1/EEJET_6_1_2005_59-61.pdf
Djomin, D. A. (2013). Artificial orthogonalization in searching of optimal control of technological processes under uncertainty conditions. Eastern-european journal of enterprise technologies, 5/9 (65), 45–53. Available at: http://journals.uran.ua/eejet/article/view/18452/16199
Djomin, D. A. (2013). Nechetkaja klasterizacija v zadache postroenija modelej «sostav – svojstvo» po dannym passivnogo jeksperimenta v uslovijah neopredeljonnosti. Problemy mashinostroenija,16 (6), 15–23.
D'omin, D. O. (1995). Dejaki aspekty upravlinnja jakistju chavunu z plastynchastym grafitom. Kharkiv, 181.
Downloads
Published
Issue
Section
License
Copyright (c) 2016 Павел Сергеевич Зинченко, Марина Петровна Аксененко, Алёна Владимировна Йовбак, Юлия Владимировна Орендарчук
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.