Soumissions

Cette revue n'accepte pas de soumissions pour le moment.

Liste de vérification de la soumission

Les auteurs-es doivent s'assurer de la conformité de leur soumission avec l'ensemble des éléments suivants. Les soumissions non conformes pourraient être retournées aux auteurs-es.
  • All requirements for the text are made
  • Article is structured
  • All requirements for the article title are made
  • All requirements for abstracts in Ukrainian and Russian are made
  • All requirements for for formatting figures are made
  • All requirements for keywords are made
  • All requirements  for table format are made
  • All requirements for formatting of the formulas are made
  • All requirements for formatting of references to literature in the text are made
  • All requirements for formatting the list of sources in the literature are made
  • All requirements for abstracts in English are made
  • All requirements for the list of literature in English (References) are made
  • All requirements  for registration information about the authors are made

Directives aux auteurs-es

I. REQUIRMENTS FOR ARTICLES

Requirements for the text

  1. Page format - A4, portrait
  2. Font – Times New Roman
  3. Font size – 14
  4. Interval –1.5
  5. Paragraph indent – 1.25 mm
  6. Alignment - Width
  7. Margins of the document – 20 mm
  8. Minimum number of pages – 10
  9. Article language: Ukrainian, Russian, English, Polish, French, German

Article structure:

UDC

TITLE OF THE ARTICLE IN ENGLISH

Full name, Full Name .... in English

Abstract in English (50–75 words).

Keywords in English (10 words)

The main sections of the article: 

1. Introduction

The introduction should provide the reader with all the information (including reference character) necessary in order to understand your research, and reasons why you hold them. This section of the article, you must create background (background for the research: to provide a general understanding of the problem, which you do, and arguments to justify the relevance of your research).

The introduction should answer the question: «What is the issue/problem is studied and why is it important?»

ADVICE: do not write literature review in the introduction, but let's references (monographs, reference books, perhaps even textbooks) to the reader if desired, could no longer deal with the problem.

2. Literature review 

This section of the article is to give an answer to the need for ongoing author’s research. 

Important! Often, as a justification for the author's research indicates that the subject (matter) is "not described" or "insufficiently described" in the scientific literature. This in no way be considered a reasoned justification. It is not enough to refer to the fact that "the problem has not yet been studied" because it is possible that it, and need to learn! 

The argument in favor of the need for the author of the research should include detailed justification for the following two points:

  1. What exactly have not been studied predecessors?
  2. Why is it important to be studied? 

Thus, the section of the article «Literature review» aims to highlight the outstanding part of other scientists studied the problem and point to "niche" of research, not occupied by other scientists to this problem (of course, the answers to two questions formulated above). 

This section is written on the basis of periodic publications of scientific publications (books, textbooks, monographs are not related to those). Overview of periodicals on the issue should include sources of not more than 10 years ago and required a review of foreign scientific periodicals on the issue. The number of foreign sources should be at least 40 %. Permission level of self-citation is not more than 30 %. A must when using references to literary sources is a critical analysis of the data source, i.e. indication that the authors of these works have been achieved and what was not. At the same time, such analysis is desirable for each source (the use of a wide range of links such as "in the works [3-7]" is not recommended). 

Section «Literature review» should give the reader an understanding of what research was conducted, the results of which the author is going to publish this article.

ADVICE: You can use the electronic resources of open access scientific journals around the world from Cochrane Library (link). The search can be performed by keyword of your subjects in English.

3. The aim and objectives of the research

This section should clearly state the aim of the research, which should flow logically from the section «Literature review». The formulation of purposes of the research should be performed in such a way that it became clear how to fill in the "niche" research (i.e. to answer the question: "what needs to be done to bridge the gap of knowledge associated with the presence of pieces of total problems unidentified by other scientists?»). 

The aim of research, formulated by the author, can be the formulation of Hypotheses and that the author wanted to prove or disprove. 

Objectives of research: it is necessary to formulate (in the form of a numbered list) the tasks that will be performed in order to achieve the aim. 

4. Materials and methods 

In this section of the article it is necessary to describe in detail all the materials that were used in the research, and the methods by which the research was conducted. 

Materials and methods should be described in such detail that the research can be repeated.

5. Research results and discussion 

Results should be presented in a logical order, and it is recommended to give the results in order of importance, it is not necessary to use the order in which the experiments were conducted. 

You should not duplicate the data shown in the figures, graphs and tables. A common mistake is to bring the data displayed in the figures and tables in the text of the article. Instead, the text of the article should summarize the material that the reader will find in the table or draw the reader’s attention to the main points in the figure or table. The reader, as a rule, is easier to read the data in the table than in the text of the article. 

Avoid excessive figures and tables. If there is not enough data for full-fledged tables and figures, it is better to describe this information in the text. 

In this section of the article you also need: 

  • Discuss your results in order from most to least important.
  • Compare your results with results from other researches – to what extent can their consistency be noted? If not, discuss the reasons for the differences.
  • Additional research can be proposed to improve or deepen the results.
  • It is imperative to briefly describe the limitations of your research and bring its possible shortcomings (this will in no way diminish the significance of your research, but it will show where you or your colleagues should move in the future).
  • Describe how your results can be practically useful and under what conditions.

7. Conclusions 

In this section of the article, be sure to indicate once again the main summarizing results on your work, paying particular attention to the consistency of the conclusions of the aim and objectives of research. This means that the Conclusions should reflect the specific results obtained by the author, on the basis of which it is possible to draw a conclusion about the scientific novelty and the possibility of practical application of the research results presented in the article. 

Conclusions should be structured in accordance with the objectives. 

Acknowledgments (if any) 

List here those people/organizations that have assisted in the course of the research (for example, provided language assistance, assistance in conducting experiments, financial assistance, etc.).

References 

Sources are made according to ДСТУ 8302:2015

References 

Sources are made according to APA standard 

Recommendation from the doctor of science (if the authors of the article do not have a doctor of science).

Attention! This recommendation is not a reason for accepting an article for publication and is not related to the review process. A positive decision on the publication of an article can be made by the editors only after successful completion of the editing stages and double-blind review. 

For each author:

  • Full name
  • Rank, position
  • Department
  • University
  • Address University
  • e-mail
  • Contact phone
  • Number of publications in Ukrainian editions (approximate)
  • Number of publications in international journals indexed (approximate)
  • H-index (if available)
  • ID ORCID


Requirements for formatting figures

1) Before a figure, there must be a reference to the figure in the form: Fig. 1, Fig. 2‒4, Fig. 5, a. Before a figure, there should be a link to the figure (in the same chapter/subsection as the figure itself)

2) The caption under a figure should take the form: Fig. 1. The title of the figure.

If the figure consists of several subfigures, the caption should take the form: Fig. 1. The title of the figure: a ‒ the name of the first subfigure; b ‒ the name of the second subfigure...

3) If there are designations, abbreviations, or abbreviations in the figure, the transcript of which were not given earlier in the text, then those should be explained in the text under the figure. For example, the figure shows three charts, which are marked, respectively, by numbers 1, 2, and 3. Then the text under the figure should take the form: Fig. 1. Title: 1 ‒ chart 1; b ‒ chart 2; 3 ‒ chart 3.

4) Text under the figure must be part of the text.

5) Figures should be streamlined "in text."

6) The inscriptions in the figure should not be bold or sloping.

7) All inscriptions in the figure must be written in one font and one size. The exception is screenshots of programs that do not allow one to edit the font.

8) The indices in the figure should take the same form as the indices in the text.

9) On the charts, the axes' titles must be moved from the scales to the same distance of at least 0.5 cm.

10) At least one size (height or width) in the text under the figure should be the same. The horizontally located subfigures should have the same height, and the vertically located ones should have the same width.

width="225"

11) Figures must be of good quality (at least 300 dpi). The inscriptions on the figures should be clear and readable, the lines of the figure should not be blurred. There should be no noise in the figure.

width=    width=

12) The editorial board reserves the right to reject a paper if the authors refuse to provide the original figure files to avoid data falsification (dwg ‒ for COMPAS drawings; SolidWorks, AutoCad, cdr. ‒ for CorelDRAW files; xls/xlsx ‒ for Excel, etc.).

 

Requirements for table format 

  1. Header table does not contain blank cells
  2. If your document table is broken into several pages, re-do the signature on a new page does not need to!
  3. All tables should be vertical (portrait orientation of the sheet in the program Word).
 

Requirements for formatting the formulas 

  1. Formulas should be typed in the MathType equation editor
  2. Links to the formula in the text are (1), (2)–(4)
  3. Formulas should be numbered
  4. The formula is part of the text, so after a claim must stand semantic mark if the new sentence goes further, then the point, if further clarification is the comma
 

Requirements for formatting the list of sources in the literature

  1. Sources must be at least 10
  2. The percentage of self-citations – no more than 30% (i.e., if you used the 10 links, only 3 of them can to your research)
  3. References should take the form [1], [2, 3]. Hyperlinks are not allowed.
  4. The use of a wide range of references like “in [3–7]” is not allowed.
  5. Links should go in order of their mention in the article.
  6. All literary sources must be referenced in the text of the article.
  7. The bibliographic list is issued at the end of the article according to DSTU 8302: 2015 and the APA standard 

 

II. MANUSCRIPT SUBMISSION

1. Registration of the manuscript of the article on the requirements of the journal.
2. Granting of the manuscript of the article to the editors by one of the methods convenient for the authors:

When submitting a manuscript to the editor, please send a letter to the e-mail:sr7508990@gmail.com as follows:

Dear Editors! 

Please find enclosed for your review an original research article, “____________”

by ________________________

All authors have read and approved this version of the article. No part of this paper was published or submitted elsewhere.

No conflict of interest exits in the submission of this manuscript. We appreciate your consideration of our manuscript for possible publication in journal "ScienceRise", and we look forward to receiving comments from the reviewers

On behalf of all authors of this manuscript,
_____________________________________ 

(Name, rank, contact (mobile), phone)
This contact should be indicated in clause 6.1. License agreement

  • submit an article on-line using the OJS platform (Open Journal System)
3. Work with the editorial staff on adjustments and updates to the article in accordance with the comments of reviewers and editors.
4. After the editorial board has accepted a positive decision to publish the article, make a final payment in accordance with the invoice (receipt) for payment.
5. Submit the license agreement.

Attention! The author (team of authors) submitting the manuscript to the editorial office of the journal "ScienceRise" agrees with all requirements for registration, submission of the manuscript of the article and payment and be responsible in case of violation of these requirements.

III. GETTING THE JOURNAL

  1. The publication of the journal is reported on the main page of the website of the journal, and the authors of the articles are sent a notification by e-mail specified in the information about the authors.
  2. You can see the electronic version of the journal in the archive (link).
  3. If a hard copy of the journal has been ordered, it will be sent to you by mail.

IV. TERMS OF PAYMENT PUBLICATIONS

Publication fee is:

  • 350.00 UAH (publication of an article of 10 pages, designed according to the requirements of the journal)
  • 650.00 UAH (publication of an article of 10 pages, designed according to the requirements of the journal + printed copy of the journal)
  • the cost of one additional page, designed according to the requirements of the journal, is 35.00 UAH.

Déclaration de confidentialité

The editorial board of the journal ''ScienceRise" pay special attention to hold all information in confidence that comes to the editorial board and has not been published yet.The basic principles the editors follow:

  • All reviewers confirm the confidentiality of information with which they work up to the time of the paper publication.
  • If a reviewer needs help or advice of experts about a particular subject matter, the reviewers report to the editorial staff and get permission for such consultation.
  • The information, proposed by the authors to the editors, is not transferred to third parties.
  • All contact information (phone numbers and addresses), which the authors give to the editorial board, is used only by the editors and is not transferred to third parties.