Гидродинамическое моделирование режимов работы тарелок провального типа, установленных в колоннах различного диаметра
DOI:
https://doi.org/10.15587/2313-8416.2017.103536Słowa kluczowe:
тарелка, гидродинамическое моделирование, колонна, геометрические характеристики, ректификация, параметр Т, бифуркацияAbstrakt
Проведено гидродинамическое моделирование работы тарелок провального типа установленных в колоннах большого диаметра на примере расчета колонны основной ректификации смеси метанол – вода. При гидродинамическом моделировании использовались экспериментальные данные, полученные при исследовании тарелок провального типа, установленных в колонне диаметром0,057 м. Экспериментальные данные были получены на модельной системе воздух – вода. Диаметр отверстий в плато тарелки составлял0,012 м
Bibliografia
Stabnikov, V. N., Shtromilo, M. I. (1971). Proval’nye tarelki rektifikacionnyh apparatov i ikh primenenie na predpriyatiyah spirtovoy promyshlennosti [Dual-flow plates of rectifying devices and their use in alcohol industry enterprises]. Moscow: CNIITEHIpishcheprom, 20.
Stabnikov, V. N., Shtromilo, M. I., Sergeev, A. D. (1984). Intensifikaciya processa peregonki v apparatah s reshotchatymi provalnymi tarelkami. P. 2 [Intensification of the process in the distillation apparatus with latticed dual-flow plates. P. 2]. Severodonetsk, 49–50.
Koltunova, L. N., Pozin, L. S., Bystrova, T. A. (1977). Puti intensifikacii pcessa rektifikacii. Opyt promyshlennogo primeneniya reshotchatyh tarelok i metodika ih rascheta [Ways of intensification of the process of rectification. Experience in the industrial application of dual-flow plates and the methodology for calculating them]. Moscow: CNIITEHneftekhim, 84.
Tarat, E. Ya., Muhlenov, I. P., Tubolkin, A. F. et. al.; Muhlenov, I. P., Tarat, E. Ya. (Eds.) (1977). Pennyi rezhim i pennye apparaty [Foam regime and foam apparatus]. Leningrad: Chemistry, 303.
Rozen, A. M., Martyushin, E. I., Olevskyi, V. M. et. al.; Rozen, A. M. (Ed.) (1980). Masshtabnyi perehod v himicheskoy tehnologii: razrabotka himicheskih apparatov metodom gidrodinamicheskogo modelirovaniya [The scale transition in chemical technology: development of industrial apparatuses hydrodynamic simulation method]. Moscow: Chemistry, 320.
Taranenko, G. V. (2013). Gidravlichskie i massoobmennye harakteristiki tarelok proval’nogo tipa s pazlichnym diametrom otversty [Hydraulic and mass transfer characteristics of the dual-flow plates with different diameter holes]. Lugansk: Izd-vo VNU im. V. Dalya, 174.
Taranenko, G. V. (2012). Hidrodinamicheskie regzhymy raboty tarelok provalnogo tipa [Hydrodynamyc regimes of dual-flow plates type of work]. Kharchova promyslovict, 13, 90–93.
Taranenko, G. (2015). Calculation of the lower operating limit of dual-flow plates with different geometrical characteristics. ScienceRise, 3 (2 (8)), 67–73. doi: 10.15587/2313-8416.2015.39196
Sherwood, T. K., Shipley, G. H., Holloway, F. A. L. (1938). Flooding Velocities in Packed Columns. Industrial & Engineering Chemistry, 30 (7), 765–769. doi: 10.1021/ie50343a008
Kasatkin, A. G., Dytnersky, Ju. I., Umarov, S. U. (1958). K raschetu kolonn c proval’nymi tarelkami. Khimicheskaya promyshlennost, 3, 38–45.
##submission.downloads##
Opublikowane
Numer
Dział
Licencja
Copyright (c) 2017 Gennadiy Taranenko
Utwór dostępny jest na licencji Creative Commons Uznanie autorstwa 4.0 Międzynarodowe.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.
