ОПЫТ ПАРО-ВОДО-КИСЛОРОДНОЙ ОБРАБОТКИ ВНУТРЕННИХ ПОВЕРХНОСТЕЙ ЭНЕРГОБЛОКОВ И КОТЛОВ ЭЛЕКТРОСТАНЦИЙ

Authors

  • Н. Н. Манькина Всероссийский теплотехнический институт, ул. Автозаводская, 14/23, 115280, Москва, Россия, Russian Federation
  • О. В. Семенова Всероссийский теплотехнический институт, ул. Автозаводская, 14/23, 115280, Москва, Россия, Russian Federation

DOI:

https://doi.org/10.18198/j.ind.gases.2002.0053

Keywords:

boiler, power-generating unit, oxygen, heating surfaces, steam-water-oxygen processing

Abstract

During more than 15 years are improving and introducing the effective technology of steam-water-oxygen processing of heat exchange's surfaces of power-generating units and boilers of thermal power plants, which designed by employees of All-Russian Thermal Engineering Institute (VTI). This processing allows to realize the purification of internal heat exchange's surfaces and also at the same time to make it passivation and preservation of carbon steels. The above technology of the effective processing is introduce on more than 150 boilers and is periodically putting into operation of 32 power units and separate boilers, including units of electric power plants by power 300, 500 and 800 MW. In the given article the technology is presentated and the experience of steam-water-oxygen rectification which using on numerous thermal power plants of Russia is generalized.

Author Biographies

Н. Н. Манькина, Всероссийский теплотехнический институт, ул. Автозаводская, 14/23, 115280, Москва, Россия

N.N. Mankina

О. В. Семенова, Всероссийский теплотехнический институт, ул. Автозаводская, 14/23, 115280, Москва, Россия

O.V. Semenova

Downloads

Issue

No. 3 (2002): Технические газы

Section

INDUSTRIAL GASES IN MODERN TECHNOLOGIES

License

LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.