SOFTWARE FOR DESIGNING OF AIR SEPARATION UNITS
DOI:
https://doi.org/10.18198/j.ind.gases.2003.0075Keywords:
air, air separation unit, designing, thermalphysic characteristics, state variable, fracking fractionator, turbo-expander assemblyAbstract
For calculation and designing of modern air separation units (ASU) it is necessary to have the dependable data about thermal, caloric and transfer characteristics of air and its components, also about mathematical models of operations and elements of ASU, which are equally demonstrating their real characteristics. Besides the quantification of state variable of ASU as complex cryogenic system is required. In given clause the complex of programs for designing of ASU is described, the common approach to definition of number of independent state variable which providing the closure of common model of air separation unit is stated. The information on the following automized systems is resulted: the system «ThermoPRO» for calculation of thermal characteristics of working bodies; the system «CryoCycle», permitting to define the power and material balances and the streams’s characteristics during the compression in compressor, the throttling, the extension in expander, the heat change in double- and three-flow heat exchangers, the separation of liquid-vapor mixture in the fluid tank; the system «TurboUnit», representing the automized workplace of the designer of turbo-expander assembly; the system «ReColumn» for calculation of processes in the fracking fractionator at various modes of operations.
Downloads
Issue
Section
License
LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.