DEVELOPMENT AND ASSIMILATION OF MANUFACTURE OF AIR SEPARATING PLANTS OF AVERAGE PRODUCTIVITY

Authors

  • Б. А. Скородумов ОАО «Криогенмаш», пр. Ленина, 67, г. Балашиха, Московская обл., 143900, Россия, Russian Federation
  • В. Н. Карпов ОАО «Криогенмаш», пр. Ленина, 67, г. Балашиха, Московская обл., 143900, Россия, Russian Federation
  • Ю. Г. Писарев ОАО «Криогенмаш», пр. Ленина, 67, г. Балашиха, Московская обл., 143900, Россия, Russian Federation
  • А. К. Головченко ОАО «Криогенмаш», пр. Ленина, 67, г. Балашиха, Московская обл., 143900, Россия, Russian Federation

DOI:

https://doi.org/10.18198/j.ind.gases.2003.0092

Keywords:

air separation installation, productivity, dimention-type series, modularity, compressor, heat exchanger, turboexpander, oxygen, nitrogen, argon, control and monitoring system

Abstract

The information on development and release by JSC «Cryogenmash» of air separation installations of average productivity designed for manufacturing oxygen and nitrogen, and if required argon, for use in technological processes of various manufactures, and also for commercial purposes are stated in article.

Author Biographies

Б. А. Скородумов, ОАО «Криогенмаш», пр. Ленина, 67, г. Балашиха, Московская обл., 143900, Россия

B. A. Skorodumov

В. Н. Карпов, ОАО «Криогенмаш», пр. Ленина, 67, г. Балашиха, Московская обл., 143900, Россия

V. N. Karpov

Ю. Г. Писарев, ОАО «Криогенмаш», пр. Ленина, 67, г. Балашиха, Московская обл., 143900, Россия

Yu. G. Pisarev

А. К. Головченко, ОАО «Криогенмаш», пр. Ленина, 67, г. Балашиха, Московская обл., 143900, Россия

A. K. Golovchenko

Downloads

Issue

No. 3 (2003): Технические газы

Section

PLANTS AND THE EQUIPMENT FOR MANUFACTURING OF AIR SEPARATION PRODUCTS AND OTHER INDUSTRIAL GASES

License

LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.