THE RESULTS OF APPLICATION STREAM-OXYGEN CLEARING, PASSIVATION AND PRESERVATION OF FLOWING PARTS OF STEAM TURBINES
DOI:
https://doi.org/10.18198/j.ind.gases.2003.0106Keywords:
a thermal power station, flowing part of turbine, stream-oxygen clearing, passivation and preservation, oxygenAbstract
Earlier by authors it was informed successful use of the method developed by them stream-oxygen clearing, passivation and preservation of internal surfaces of heating of boiler units. In present article are submitted results of introduction of the given method for the flowing parts of condensing turbines and back-pressure turbines. Are described various stream-oxygen technologies depending on the circuit of power station and such as turbines. Results of the chemical control are submitted at realization stream-oxygen processings of turbines on «Lipetsk thermal power station - 2», the «Krasnoyarsk state district power station - 2» and the «Oryol thermal power station» which have confirmed high efficiency of a used method.
Downloads
Issue
Section
License
LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.