THE MULTI-STREAM PLATE-FIN HEAT EXCHANGER CALCULATION METHOD AND SOFTWARE
DOI:
https://doi.org/10.18198/j.ind.gases.2006.0259Keywords:
Heat exchanger, Multi-stream, Plate-fin, Method, Calculation, Software, Graphics user interface, Experiment, ComparisonAbstract
The multi-stream plate-fin heat exchanger calculation software is described. The program has friendly graphics user interface and provides overall calculation process (from inputting initial data to generating report). The calculation method is reported. The calculation program module is created on basis of this method has very high reliability. This has been confirming by mainte-nance experience during 10 years, and calculated and measured data comparison results. Meas-ured data have been received at real heat exchangers of air plants.
Downloads
Issue
Section
License
LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.