CHARACTERISTICS OF COMPRESSOR PLANTS OF BLOCK PERFORMANCE FOR ASP OF CYCLES OF HIGH AND AVERAGE PRESSURE
DOI:
https://doi.org/10.18198/j.ind.gases.2007.0281Keywords:
Air, Piston compressor, Multistage compression, Piston, Valve, Greasing, Piston forces, Forces of inertia, EquilibrationAbstract
For complete set of modern air separation plants (ASP) using cycles of average and high pressure, the compressor plants of block performance are developed. They are created on ten-ton base, have two lines of cylinders. In them the optimum layout circuits which have allowed to provide a high degree of compactness of plants, good steadiness of forces of inertia are applied. The plant with the four-stage compressor 2ВМ10-27/71 will replace the compressors of old updatings in ASP K-0,25, КА-0,2 and Ag-0,25, and plant with the six-step compressor 2ВМ10-22/201 — in ASP КgКАg-0,25 and КgКАg-0,5.
Downloads
Issue
Section
License
LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.