PERFECTION THE MANUFACTURING TECHNOLOGY OF ARMATURE FOR TECHNICAL GASES

Authors

  • Вацлав Влчек «Traccom s.r.o.» (представительство «Herose GmbH»), Klostermannova, 138, Chomutov, Czech Republic, 43001, Czechia
  • Иоахим Эмке «Herose GmbH», Elly-Heuss-Knapp-Strasse, 12, Bad Oldesloe, Germany, 23843, Germany

DOI:

https://doi.org/10.18198/j.ind.gases.2007.0308

Keywords:

Armature, Valves, Technical gases, Manufacture, Quality, Control, Tests, De-greasing

Abstract

The firm «Herose GmbH» constantly is engaged in improvement of quality of armature, improvement of its characteristics. With this purpose all technological processes of its ma-nufacturing, assembly and control are improved. The basic production phases of armature are described, their features are reflected. It is marked that both manufacture and made products correspond  to requirements of European standard ISO 9000:2000.

Author Biographies

Вацлав Влчек, «Traccom s.r.o.» (представительство «Herose GmbH»), Klostermannova, 138, Chomutov, Czech Republic, 43001

Vaclav Vlcek

Иоахим Эмке, «Herose GmbH», Elly-Heuss-Knapp-Strasse, 12, Bad Oldesloe, Germany, 23843

Joachim W. Ehmke

Downloads

Issue

No. 3 (2007): Технические газы

Section

PRACTICE. NEW PROJECTS

License

LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.