AUTOMOBILE GAS-FILLING COMPRESSOR STATIONS OF NEW GENERATION

Authors

  • А. В. Смирнов ОАО «Сумское машиностроительное НПО им. М.В. Фрунзе», ул. Горького, 58, г. Сумы, Украина, 40004, Ukraine
  • В. С. Слатвинский ОАО «Сумское машиностроительное НПО им. М.В. Фрунзе», ул. Горького, 58, г. Сумы, Украина, 40004, Ukraine
  • А. С. Игитов ОАО «Сумское машиностроительное НПО им. М.В. Фрунзе», ул. Горького, 58, г. Сумы, Украина, 40004, Ukraine

DOI:

https://doi.org/10.18198/j.ind.gases.2008.0382

Keywords:

Natural gas, Gas dewatering, Automobile gas-filling compressor station

Abstract

Manufacturers of  automobile gas-filling compressor stations improve them, taking into account the high requirements not only to characteristics, but also to operational and ecological parameters. To all this there corresponds the stations of new parametrical lines. In them for the first time is applied energy-efficient adsorption short-swing gas dewatering with heatingless regeneration of sorbent. The compressor equipment which is included in the base technological block is established in the container where the necessary microclimate is supported. Parameters of four stations of new generation are resulted.

Author Biographies

А. В. Смирнов, ОАО «Сумское машиностроительное НПО им. М.В. Фрунзе», ул. Горького, 58, г. Сумы, Украина, 40004

A.V. Smirnov

В. С. Слатвинский, ОАО «Сумское машиностроительное НПО им. М.В. Фрунзе», ул. Горького, 58, г. Сумы, Украина, 40004

V.S. Slatvinsky

А. С. Игитов, ОАО «Сумское машиностроительное НПО им. М.В. Фрунзе», ул. Горького, 58, г. Сумы, Украина, 40004

A.S. Ihitov

Downloads

Issue

No. 4 (2008): Технические газы

Section

PLANTS AND THE EQUIPMENT FOR MANUFACTURING OF AIR SEPARATION PRODUCTS AND OTHER INDUSTRIAL GASES

License

LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.