MODERN ATMOSPHERIC VAPORIZERS OF CRYOGENIC LIQUIDS

Authors

  • К. А. Иванов ООО «НПО Мониторинг», Щёлковское шоссе, 100, корпус 1, офис 34, г. Москва, РФ, 105523, Russian Federation
  • Н. В. Павлов ООО «НПО Мониторинг», Щёлковское шоссе, 100, корпус 1, офис 34, г. Москва, РФ, 105523, Russian Federation

DOI:

https://doi.org/10.18198/j.ind.gases.2010.0497

Keywords:

Liquid cryoproducts, Cryogenic equipment, Atmospheric vaporizers, A longitudinal ribbed pipe, Industrial gases, Gasifiers

Abstract

A rapid development of a cryogenic equipment market in the CIS is caused by the arrival of abroad new technologies, which actively use all kinds of industrial gases. The use of significant quantity of industrial gases, including air separation products and natural gas, requires storage and gasification systems of cryogenic products. NPO Monitoring, LLC has developed a standard range of atmospheric vaporizers from a longitudinal ribbed pipe of a special shape. The use of a Russian pipe allows to reduce its cost and respond quickly to the market demands. This article shows the benefits and the main characteristics of vaporizers made from lengthwise ribbed pipes and also the products design peculiarities.

Author Biographies

К. А. Иванов, ООО «НПО Мониторинг», Щёлковское шоссе, 100, корпус 1, офис 34, г. Москва, РФ, 105523

K.A. Ivanov

Н. В. Павлов, ООО «НПО Мониторинг», Щёлковское шоссе, 100, корпус 1, офис 34, г. Москва, РФ, 105523

N.V. Pavlov

Downloads

Issue

No. 3 (2010): Технические газы

Section

PLANTS AND THE EQUIPMENT FOR MANUFACTURING OF AIR SEPARATION PRODUCTS AND OTHER INDUSTRIAL GASES

License

LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.