OPTIMIZATION OF ADSORBERS GEOMETRICAL SIZES, USED IN CLEANING TECHNOLOGIES OF RARE GASES
DOI:
https://doi.org/10.18198/j.ind.gases.2010.0517Keywords:
Rare gases, Neon, Helium, Periodic adsorption, Working phase, Regeneration, Sorbent, Adsorber, OptimizationAbstract
The complex of calculation models is worked out for description the sequence of periodical adsorption processes. As a target function optimization is proposed to use a generalized performance criterion of the adsorber, which takes into account the real absorptive capacity of the sorbent and the duration of the working cycle. Examples of optimization adsorbers sizes are reduced. Reserves for the further perfection of industrial adsorbers used for recovery and cleaning inert gases are found. The research results helped to reduce the volume of calculations in the process of development new technology and simplify the initial stage of the project works.
Downloads
Issue
Section
License
LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.