DEVELOPMENT PISTON COMPRESSOR BLOCK DESIGN 4VM10-55/71M1 FOR AIR SEPARATION PLANTS MEDIUM PRESSURE

Authors

  • А. В. Смирнов ОАО «Сумское НПО им. М.В. Фрунзе», ул. Горького, 58, г. Сумы, Украина, 40004, Ukraine
  • Н. П. Гринь ОАО «Сумское НПО им. М.В. Фрунзе», ул. Горького, 58, г. Сумы, Украина, 40004, Ukraine
  • Ю. Б. Наталуха ОАО «Сумское НПО им. М.В. Фрунзе», ул. Горького, 58, г. Сумы, Украина, 40004, Ukraine

DOI:

https://doi.org/10.18198/j.ind.gases.2010.0529

Keywords:

Piston compressor, Air separation unit, Block design

Abstract

NPO, named by M.V. Frunze (Sumy, Ukraine) is a manufacturer of compressors for air separation units (ASU), average productivity. On their basis the production of technical gases in Ukraine, Russia and other countries are making. Great demand is used a medium pressure compressor 4VM10-55/71 providing ASU air from the pressure of 7 MPa. Reported about the development and manufacture this compressor in the block design. When you create a compressor plant used optimal layout scheme, which will enable a high degree of compactness and prefabrication. Was looking also an alternative layout of the compressor in light building construction.

Author Biographies

А. В. Смирнов, ОАО «Сумское НПО им. М.В. Фрунзе», ул. Горького, 58, г. Сумы, Украина, 40004

A.V. Smirnov

Н. П. Гринь, ОАО «Сумское НПО им. М.В. Фрунзе», ул. Горького, 58, г. Сумы, Украина, 40004

N.P. Grin

Ю. Б. Наталуха, ОАО «Сумское НПО им. М.В. Фрунзе», ул. Горького, 58, г. Сумы, Украина, 40004

Yu.B. Nataluha

Downloads

Issue

No. 6 (2010): Технические газы

Section

PLANTS AND THE EQUIPMENT FOR MANUFACTURING OF AIR SEPARATION PRODUCTS AND OTHER INDUSTRIAL GASES

License

LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.