IMPROVED PARAMETERS FOR PISTON COMPRESSORS ON THE OPPOSED BASIS FOR 4M10 ASU MEDIUM PRESSURE
DOI:
https://doi.org/10.18198/j.ind.gases.2011.0584Keywords:
Piston compressor, Multi-stage air compression, Lubrication of compressor, Block design, Improvement of the compressors, ActuatorAbstract
Company «Sumy NPO named by Frunze» — a manufacturer of piston compressors for air separation units (ASU), operating on a thermodynamic cycle average pressure. Company is constantly improving them, given the high demands not only technical, but also to the performance characteristics of compressors. About the elaboration of the 4VM10-65/71 compressor on the basis of serial 4VM10-55/71 compressor final pressure of 7 MPa and a complete different type of drives is reported. The methods improved performances of a new compressor 4VM10-65/71 are considered.
Downloads
Issue
Section
License
LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.