SOME FEATURES OF OPERATION SAFETY PROVISIONS IN THE COURSE OF MANUFACTURE AND APPLICATION OF AIR SEPARATION PRODUCTS
DOI:
https://doi.org/10.18198/j.ind.gases.2013.0699Keywords:
Manufacture of air separation products, Oxygen, Oxygen distribution point, Oxygen cylinder, SafetyAbstract
The experience and the knowledge which have been gained as a result of long-term studies and operation of the equipment intended for obtaining air separation products and their use were quite fully represented in the Safety regulations for manufacture and application of air separation products previously developed and operated, as well as in operation manuals for various equipment. Fulfillment of the requirements of these documents practically always provides safety of the personnel. At the same time explosions and inflammations of the oxygen equipment continue to occur. The attention to the necessity of absolute fulfillment of some points of safety regulations is drawn.
References
Kortikov A.V. (2011). Practical safety matters operation with the iequipment for production, transportation and consumption of air separation products. Argon and nitrogen// Tekhnicheskie Gazy. [Industrial Gases]. — № 1. — P. 63-68. (Rus.).
Kortikov A.V. (2011). Practical safety matters at the equipment for production and consumption air separation products. Oxygen// Tekhnicheskie Gazy. [Industrial Gases]. — № 6. — P. 55-60. (Rus.).
Ivanov B.A., Rozovskiy A.S., Faynshteyn V.I. (2011). Methods to prevent explosions of oxygen cylinders// Tekhnicheskie Gazy. [Industrial Gases]. — № 2. — С. 66-68.
Faynshteyn V.I. (2013). Oxygen, nitrogen, argon — the safety in production and use. — М.: Intermet Engineering. — 224 p. (Rus.).
Downloads
Issue
Section
License
LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.
