THE STATE AND PROSPECTS OF DEVELOPING PRODUCTION AND USE OF AIR SEPARATION PRODUCTS
DOI:
https://doi.org/10.18198/j.ind.gases.2013.0701Keywords:
Cryogenic engineering, Air separation, Oxygen, Nitrogen, Argon, Rare gases, Compressors, Thermal insulation, Tanks for liquid cryogenic products, Armature, Efficiency, SafetyAbstract
The fourteenth international seminar on a topical problem of increasing the efficiency and safety of air separation products production (30th September-4th October, 2013, Odessa) has gathered over 80 experts from 60 enterprises and companies of 11 countries. Manufacturers of the equipment and those who use it for separating oxygen, nitrogen and argon from air, which are required for modern manufactures and technologies, took part in the seminar. The companies engaged in the gas business also showed interest to the seminar. The organizer of the seminar was UA-SIGMA, the Ukrainian Association of Manufactures of Industrial Gases. At the seminar 30 reports have been presented and discussed. In the reports the state and prospects of developing research, engineering and design work on the problem topics of the seminar have been described. Active and interested perception of the information, the contacts with the experts enabled the seminar participants to improve their qualification, to get recommendations necessary for the further improvement of the equipment that is created and used. The content of the reports is considered. The conclusion was drawn that it was important to hold such a seminar in connection with a growing demand for air separation products as well as higher requirements to the level of efficiency and safety of air separation installations.
References
Lavrenchenko G.K. (2013). The analysis of technical and technological support production and use of air separation products// Tekhnicheskie Gazy. [Industrial Gases]. — № 1. — P. 4-20. (Rus.).
Lavrenchenko G.K. (2003). Personnel support of the enterprises manufactures the products of air separation// Tekhnicheskie Gazy. [Industrial Gases]. — № 3. — P. 2-7. (Rus.).
Lavrenchenko G.K. (2004). Development of the system of continuous education to the production worker// Tekhnicheskie Gazy. [Industrial Gases]. — № 4. — P. 2-6. (Rus.).
Kapitsa P.L. (1981). Experiment. Theory. Practice. — Moscow: Science. — 496 p. (Rus.).
Tarasova E.Yu. (2013). JSC «Сryogenmash» on-site-projects: development and operation experience// Tekhnicheskie Gazy. [Industrial Gases]. — № 4. — P. 59-64. (Rus.).
Lenskiy A.B., Kryakovkin V.P., Klebleev T.I. (2013). The experience of creation of flat bottom cryogenic tanks// Tekhnicheskie Gazy. [Industrial Gases]. — № 4. — P. 41-47. (Rus.).
Cheremnyih O.Ya. (2013). The new generation of cryogenic railway tanks for transportation of air separation liquid products// Tekhnicheskie Gazy. [Industrial Gases]. — № 5. — P. 66-72. (Rus.).
Leontev A.A., Lupenko O.A., Lupenko Yu.A. (2013). Системы автоматического управления воздухоразделительных установок малой производительности// Tekhnicheskie Gazy. [Industrial Gases]. — № 5. — P. 46-50. (Rus.).
Pavlov N.V., Ivanov K.A. (2013). The use of atmospheric evaporators in the systems of storage and gasification of liquid cryogenic products // Tekhnicheskie Gazy. [Industrial Gases]. — № 4. — P. 70-72. (Rus.).
Senik M.G., Korotaev E.G. (2010). Perlite production in mobile complexes for cryogenic equipment insulation in the process of its buillding// Tekhnicheskie Gazy. [Industrial Gases]. — № 3. — P. 70-72. (Rus.).
Smirnov A.V., Fesenko V.N., Nataluha Yu.B. et al. (2013). Development of the five stage compressor installation 2VМ10-24/81 of the unitized design// Tekhnicheskie Gazy. [Industrial Gases]. — № 4. — P. 35-40. (Rus.).
Voronin I.B. (2008). Features and characteristics triaxial semitrailer for storage and transportations cryoproducts// Tekhnicheskie Gazy. [Industrial Gases]. — № 2. — P. 67-72. (Rus.).
Kozlovskiy A.V., Markovskiy S.N., Mozhaev A.N. et al. (2007). Application of mass-spectrometers for organization of gas analysis on manufactures of air separation products and especially pure gases// Tekhnicheskie Gazy. [Industrial Gases]. — № 1. — С. 67-72. (Rus.).
Faynshteyn V.I., Purtov N.A. (2013). The study of thermal modes of the adsorbers of PSA- installations// Tekhnicheskie Gazy. [Industrial Gases]. — № 4. — P. 32-34. (Rus.).
Faynshteyn V.I. (2013). Some features of operation safety provisions in the course of manufacture and application of air separation products// Tekhnicheskie Gazy. [Industrial Gases]. — № 5. — P. 63-65. (Rus.).
Lavrenchenko G.K., Plesnoy A.V. (2013). Increasing the efficiency of the gas-expansion machine-compressor units used in the structure of the air-separating installations of medium pressure// Tekhnicheskie Gazy. [Industrial Gases]. — № 4. — P. 18-23. (Rus.).
Lavrenchenko G.K., Kopyitin A.V. (2006). Use of natural gas and oxygen for increase of efficiency of powerful of steam-turbine plants// Tekhnicheskie Gazy. [Industrial Gases]. — № 6. — P. 38-46. (Rus.).
Bondarenko V.L., Simonenko Yu.M., Chigrin A.A. (2013). Does helium have the future?// Tekhnicheskie Gazy. [Industrial Gases]. — № 6. — P. 22-28. (Rus.).
Vasserman A.A., Slyinko A.G., Galkin V.N. (2013). Description of equilibrium liquid–vapor in binary mixtures of nitrogen, argon and oxygen// Tekhnicheskie Gazy. [Industrial Gases]. — № 5. — P. 57-62. (Rus.).
Downloads
Issue
Section
License
LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.
