THE DEVELOPMENT OF A HIGH-SPEED AIR PISTON COMPRESSOR FOR ASU OF A NEW GENERATION

Authors

DOI:

https://doi.org/10.18198/j.ind.gases.2014.0754

Keywords:

Air separation installation, Piston compressor, Experimental studies, Band-pass valves, Capacity, Crankshaft rotation frequency of the compressor, Efficiency

Abstract

The demand for air separation products grows. In this connection there is a need for an air piston compressor of higher capacity for use in a cryogenic air separation installation that implements the cycle of a medium pressure. The development of a new compressor 4VM10-75/71 on the well-proven compressor base 4VM10 is reported about. Some design features of the piston compressor 4VM10-75/71 of an increased capacity have been presented. The procedure of monitoring the operation of the given compressor during the tests has been described. The features of the choice of band-pass valves for the given compressor have been considered taking into account the increased shaft rotation frequency. 

Author Biographies

А. В. Смирнов, «Sumskoe Machine Building Scientific Production Association named by M.V. Frunze», Str. Gorky, 58, Sumy, Ukrainе, 40004

A.V. Smirnov, Candidate of Technical Sciences

В. Н. Фесенко, «Sumskoe Machine Building Scientific Production Association named by M.V. Frunze», Str. Gorky, 58, Sumy, Ukrainе, 40004

V.N. Fesenko

Ю. Б. Наталуха, «Sumskoe Machine Building Scientific Production Association named by M.V. Frunze», Str. Gorky, 58, Sumy, Ukrainе, 40004

Yu.B. Natalukha

В. В. Найчук, «Sumskoe Machine Building Scientific Production Association named by M.V. Frunze», Str. Gorky, 58, Sumy, Ukrainе, 40004

V.V. Naychuk, PhD Student

В. Ф. Оболоник, «Sumskoe Machine Building Scientific Production Association named by M.V. Frunze», Str. Gorky, 58, Sumy, Ukrainе, 40004

V.F. Obolonik

References

Smirnov A.V., Fesenko V.N., Natalukha Yu.B., Naychuk V. V. (2012). Establishment and improvement of compressor equipment for asu and other facilities// Tekhnicheskie Gazy. [Industrial Gases]. — № 5. — P. 46-50. (Rus.).

Natalukha Yu.B., Smirnov A.V., Fesenko V.N. (2011). Improved parameters for piston compressors on the opposed basis for 4М10 ASU medium pressure// Tekhnicheskie Gazy. [Industrial Gases]. — № 6. — P. 28-32. (Rus.).

Grin N.P., Natalukha Yu.B., Smirnov A.V. (2010). Development piston compressor block design 4VM10-55/71M1 for air separation plants medium pressure// Tekhnicheskie Gazy. [Industrial Gases]. — № 6 — P. 31-35. (Rus.).

Smirnov A.V., Fesenko V.N., Natalukha Yu.B., Naychuk V.V. Obolonik V.F. (2014). Creating a compressor unit 2GM10A-P-18 / 9-26, and the results of its testing mode resonance charging// Kompressornaya tekhnika i pnevmatika. [Compressors and Pneumatic]. — № 2 — P. 13-17. (Rus.).

Downloads

Issue

No. 6 (2014): Технические газы

Section

PLANTS AND THE EQUIPMENT FOR MANUFACTURING OF AIR SEPARATION PRODUCTS AND OTHER INDUSTRIAL GASES

License

LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.