ADAPTIVE AUTOMATIC CONTROL SYSTEMS CRYOGENIC HELIUM UNIT: FEATURES AND FEASIBILITY OF DEVELOPING

Authors

DOI:

https://doi.org/10.18198/j.ind.gases.2015.0770

Keywords:

Сryogenic helium plant, Helium liquefier, The automatic control system, Transition mode, Adaptive ACS, Optimal algorithm

Abstract

In cryogenic helium plants (CHP) using the automatic control system (ACS) at various levels. All modern foreign and fatherland ACS CHP are based on computer technology. This increases the reliability and efficiency of CHP, reduces energy consumption. However, for the correction algorithm of the parameters and contours of automatic control requires the participation of highly qualified professionals, developers CHP as well as her ACS. In connection with this, there is a need to develop a new generation ACS continuous adaptation process, which will provide regulators with reconfiguring object without changing the characteristics of control and attendants intervention. The features of the adaptive ACS and the expediency of their development. The following major objectives that must be addressed.

Author Biography

И. К. Буткевич, P.L. Kapiza Institute of Physical Problems of RAS, Kosygin str., 2, Moscow, Russia, 119334

Dr. Sci. Sciences

References

Aleksandrova I.V., Butkevich I.K. (2008.). Modern problems of automation of cryogenic helium plants// Herald N.E. Bauman MSTU. A series of «Machinebuilding». — P. 102-112. (Rus.).

Antonov V.N., Prishvin A.M., Terehov V.A., Yanchevskiy A.E. (1984). Adaptive automatic control system/ Ed. V.B. Yakovlev.— L.: Publisher of the Leningrad State University. — 204 p. (Rus.).

Butkevich I.K. (2010). Automatization of cryogenic helium plants and systems: problems and solutions// Tekhnicheskie Gasy. [Industrial Gases]. — № 5. — P. 41-46. (Rus.).

Vostrikov A.S., Frantsuzov G.A. (2004). The theory of automatic control. — М.: Higher School. — 365 p. (Rus.).

Handbook of automatic control theory. (1987)// Ed. A.A. Krasousky. — М.: Science. — 712 p. (Rus.).

Zigler J.C., Nichols N.B. (1992). Optimum settings for automatic controllers. — USA: Research Triangle Park. — 759 p.

Issue

Section

PLANTS AND THE EQUIPMENT FOR MANUFACTURING OF AIR SEPARATION PRODUCTS AND OTHER INDUSTRIAL GASES