NEWLY DESIGNED MECHANIZED TEST BENCH FOR CYLINDER'S EXAMINATION AND REPAIR

Authors

  • А. Д. Бровко Производственно-коммерческая фирма «Криопром», а/я 99, г. Одесса, 65026, Украина, Ukraine
  • Н. А. Тешин Производственно-коммерческая фирма «Криопром», а/я 99, г. Одесса, 65026, Украина, Ukraine

DOI:

https://doi.org/10.18198/j.ind.gases.2003.0111

Keywords:

cylinder, examination, repair, test bench, mechanization, industrial safety

Abstract

Earlier manufactured equipment for cylinder's examination and repair is fall short of present requests for mechanized labour. Cylinder's examinations were carried out with lot of manual labour. Particular qualities of newly designed test bench for cylinder's examination and repair are described in this article. Creating new test bench authors attend to high level of mechanization and industrial safety. If plants producing technical gases use new test bench, labour productivity will raise and worker traumatism will bring down.

Author Biographies

А. Д. Бровко, Производственно-коммерческая фирма «Криопром», а/я 99, г. Одесса, 65026, Украина

A. D. Brovko

Н. А. Тешин, Производственно-коммерческая фирма «Криопром», а/я 99, г. Одесса, 65026, Украина

N. A. Teshin

Downloads

Issue

No. 4 (2003): Технические газы

Section

PRACTICE. NEW PROJECTS

License

LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.