THE ANALYSIS OF TECHNICAL AND TECHNOLOGICAL SUPPORT PRODUCTION AND USE OF AIR SEPARATION PRODUCTS
DOI:
https://doi.org/10.18198/j.ind.gases.2013.0653Keywords:
Cryogenic engineering, Air separation, Oxygen, Nitrogen, Argon, Rare gases, Compressors, Insulation, Tanks for liquid cryogenic products, Armature, Efficiency, SafetyAbstract
The thirteenth International Workshop (1-5 October 2012, Odessa) on the actual problem of increasing the efficiency and safety of production air separation products (PPRV) gathered 80 experts from 70 enterprises and companies from the 11 states. In the work of the workshop have taken part the manufacturers of equipment and those who use it to extract oxygen, nitrogen and argon from air that necessary for ensuring of modern industries and technologies by them. At the workshop were also presented the companies work in gas business. The workshop organizer is the Ukrainian association of industrial gases manufacturers «UA-SIGMA». At the workshop were presented and discussed about 30 reports in which the characteristic of the state and prospects for development air separation products manufactures were learnt and discussed at the workshop, the results of research and design-engineering work on the problem questions of the workshop are stated. The active and interested perception of information, contacts with specialists have allowed to workshop participants improve qualification, get recommendations necessary to further improvement created and used equipment and installations. The content of reports is considered. The conclusion about the importance of carrying out of the workshop in connection with the anticipated growth in demand for air separation products after overcoming the crisis in the economy, and also presenting the higher requirements to be achieved by the level of effectiveness and safety of air separation plants.
References
Lavrenchenko G.K. (2012). Productivity meeting of the producers and consumers air separation products// Tekhnicheskie Gazy./ Industrial Gases. –– No. 1. –– P. 2-17. (Rus.).
Lavrenchenko G.K. (2003). Personnel support of the enterprises manufactures the products of air separation// Tekhnicheskie Gazy./ Industrial Gases. — No. 3. — P.2-7. (Rus.).
Lavrenchenko G.K. (2004). Развитие системы непрерывного образования производственников// Tekhnicheskie Gazy./ Industrial Gases. — No. 4. — P. 2-6. (Rus.).
Kapitsa P.L. (1981). Experiment. Theory. Practice. — Мoscow: Science. — 496 p. (Rus.).
Tarasova E.Yu., Kortikov A.V. (2012). Trends of improvements the air separation plants produced by JSC «Cryogenmash // Tekhnicheskie Gazy./ Industrial Gases. — No. 6. — P. 42-46. (Rus.).
Kortikov A.V. (2012). Starting conditions of air separation plants provided with argon production unit// Tekhnicheskie Gazy./ Industrial Gases. — No. 5. — P. 41-45. (Rus.).
Podgorny I.P. (2012). Modern manufacturing plant products of air separation the company «ElmeMesserGaas»// Tekhnicheskie Gazy./ Industrial Gases. — No. 5. — P. 67-72. (Rus.).
Smirnov A.V., Fesenko V.N., Natalukha Yu.B. et al. (2012). Establishment and improvement of compressor equipment for ASU and other facilities// Tekhnicheskie Gazy./ Industrial Gases. — No. 5. — С. 46-50. (Rus.).
Lavrenchenko G.K., Kebal E.E. (2012). «Air Liquide» expands its presence in Russia// Tekhnicheskie Gazy./ Industrial Gases. — No. 3. — С.11-16. (Rus.).
Bondarenko V.L., Vigurzhinskaya S.Yu., T.V. Diachenko, O.V. et al. (2013). Reduce expences of liquid nitrogen at cryogenic supply extraction technology rare gases// Tekhnicheskie Gazy./ Industrial Gases. — No. 1. — P. 21-29. (Rus.).
Bondarenko V.L., Losyakov N.P., Losyakov I.A. et al. (2011). New technologies extraction concentrates of rare gases// Tekhnicheskie Gazy./ Industrial Gases. — No. 1. — P. 42-52. (Rus.).
Bondarenko V.L., Symonenko Yu.M. (2009). Cryogenic technologies of rare gases extraction. — Odessa: PО «Publishing centre». — 232 p. (Rus.).
Senik M.G., Korotaev E.G. (2010). Perlite production in mobile complexes for cryogenic equipment insulation in the process of its building // Tekhnicheskie Gazy./ Industrial Gases. — No. 3. — P. 70-72. (Rus.).
Gluckhov A.V., Gluckhov V.A., Tanygin A.V. (2011). Efficient air dehumidifier «RS-400» for cryogenic air separation units// Tekhnicheskie Gazy./ Industrial Gases. — No. 6. — P. 67-72. (Rus.).
Fastov I.S., Fastov S.A. (2013). High zeolitic nanostructured an adsorbent for air dryer in cryogenic ASU// Tekhnicheskie Gazy./ Industrial Gases. — No. 1. P. 69-72. (Rus.).
Brovko A.D., Vorobyov А.V., Borshchevskiy V.А. (2012). Creation of supporting facilities for oxygen production// Tekhnicheskie Gazy./ Industrial Gases. — No. 6. — P. 64-67. (Rus.).
Dankert-Paulsen Ralf, Vlcek Vaclav. (2012). Research the reliability of safety valves at possible overflow vessel of a liquid cryogenic product // Tekhnicheskie Gazy./ Industrial Gases. — No. 4. — P. 61-65. (Rus.).
Galkin A.D., Kolenko N.N., Panov E.I. (2011). Automatic armature for special conditions of application// Tekhnicheskie Gazy./ Industrial Gases. — No. 3. — P. 69-72. (Rus.).
Chrz Vaclav, Krivan Jiri, Zaruba Petr et al. (2012). Whether to store LNG in tanks with flat bottoms or vacuum insulated containers?// Tekhnicheskie Gazy./ Industrial Gases. — No. 5. — P. 14-20. (Rus.).
Ivanov К.А., Pavlov N.V., Ivanov А.А. (2012). Quick connectors for the gas cylinder filling stations Tekhnicheskie Gazy./ Industrial Gases. — No. 6. — P. 68-70. (Rus.).
Bondarenko V.L., Grafov A.P., Kupriyanov М.Yu. et al. (2012). Optimization of the process of 3 Нe isotope extracting from natural helium// Tekhnicheskie Gazy./ Industrial Gases. — No. 6. — P. 47-53. (Rus.).
Bondarenko V.L., Chuklin A.P. (2012). Calculation of the baromembrane processes of rare gases extraction// Tekhnicheskie Gazy./ Industrial Gases. — No. 6. — P. 26-33. (Rus.).
Bondarenko V.L., Symonenko Yu.M., Diachenko O.V. et al. (2012). Obtaining stable neon isotopes in the cascade rectification columns// Tekhnicheskie Gazy./ Industrial Gases. — No. 5. –– P. 29-40. (Rus.).
Vasserman A.A., Slyn’ko A.G., Galkin V.N. (2012).Equations for calculation of equilibrium liquid-vapor in binary mixtures of air components// Tekhnicheskie Gazy./ Industrial Gases. — No. 6. — P.59-63. (Rus.).
Downloads
Issue
Section
License
LICENSE AGREEMENT
After receiving an article for publication as required revision scientometric databases each author directs the license agreement on the assignment and transfer of the management of copyright. Signatures of the author (s) it is desirable to seal the personnel department of the institution where the author works (authors), or the seal of the Faculty.
Revision refers to the authors one layout for proofreading. Permissible only those fixes that result in compliance with the layout of the original text of the article. Significant changes are not permitted. Layout should be sent to the editorial office within days of receipt.
