Analysis of the influence of surrounding gas pressure on the geometric sizes and features of expansion of the aluminium laser plasma
DOI:
https://doi.org/10.24144/2415-8038.2010.27.60-65Keywords:
Aluminium laser plasma, Intensity of radiation, Spatial characteristics,Abstract
The results of the studies on the intensity of luminescence of different spatial areas of the laser plasma of Аl are presented at different distances from the target. The intensity of the laser radiation was (4,4 − 4,8) ´ 108 W/сm2 at the gas pressures in a vacuum chamber at (6,7 − 133,3)Pa. The process of the shock waves formation is reflected on the dependence of the intensity of radiation of the laser plasma on the distance to the target at different pressures in a vacuum chamber as heterogeneities. The change of the pressure substantially influences such parameters of the laser plasma, as the size of the plasma plume and the concentrations of the particles in the plume.
References
Ristocu C., Gyorgy E., Mihailescu I.N., Klini A., Zorba V., Fotakis C. Effects of pulse laser duration and ambient nitrogen pressue in PLD of AlN // Appl. Phys. -2004. -Vol. 79. - P. 927–929.
Nica P., Vizureanu P., Agop M., Gurlui S., Focsa C. Experimental and Theoretical Aspects of Aluminium Expanding Laser Plasma // J.J. Appl. Phys. -2009. - Vol. 48. - Р. 1-6.
Wood R. F., Chen K.R., Leboeuf J. N., Puretzky A.A., Geohegan D. B. Dynamics of Plume Propagation and Splitting during Pulsed-Laser Ablation // Physical Review Letters. -1997. -Vol 79. -N 8. -P. 1571-1574.
Ang L. K., Lau Y.Y., Gilgenbach R. M., Lash J. S. Surface instability of multipulse laser ablation on metalic target // J. Appl. Phys. -1998. -Vol. 83. -N.8. - P. 4466-4471.
Itina T., Hermann J., Delaporte P., Sentis M. Laser-generated plasma plume expansion: Combined continuous-microscopic modeling // Physical Review. - 2002. E 66. - P. 1-12.
Xiangtai Wang, Baoyuan Man. Laser-Induced Plasma on the Surface of Aluminum Target in Air // Journal of the Korean Physical Society. -1998. - Vol. 32. -No. 3. -Р. 373-379.
Сукач Г.О., Кідалов В.В., Ревенко А.С., Чобанюк В.М., Фреїк Д.М. Фізико-хімічні аспекти матеріалів підкладок для епітаксійного вирощування плівок GaN // Фізика і хімія твердого тіла -2007. - Т. 8. -№ 2. -С. 227-239.
Grzegory I., Bockowski M., Lucynik B. Direct evidence of tensile strain in wurtzite structure n-GaN layers on n-Si (111) using AlN buffer layers // J. Mater. Sci. Semicond. Process. -2001. -V.4. - P. 535-539.
Danylyk Y., Romanov D., McCullen E. Optical properties of contrillable self-assembled lateral nanostructures on InN, InAlN, and AlN thin films // Mat. Res. Soc. Proc. -2003. -V. 743 - P. 1-6.
Месарош Л.В., Чучман М.П., Шуаібов О.К., Качер І.Е., Ласлов Г.Е. Дослідження випромінювання лазерної плазми алюмінію при різних тисках повітря // Науковий вісник Ужгородського університету. Серія Фізика. -2009. - Т. 25. - С. 126-130.
Сухов Л.Т. Лазерний спектральний аналіз. -Н: Наука, 1990. -143 с.
Мищенко К. П., Равделя А.А. Краткий справочник физико-химических вели-чин. – Л: Химия, 1974. - 200 с.
Amoruso S., Toftmann B., Schou J., Velotta R., Wang X. Diagnostics of laser ablated рlasma plumes // Thin solid films. - 2004. V. 453-454. -P. 562-572.
Чучман М.П., Шуаибов А.К. Эмиссионные характеристики и пара-метры лазерного факела на основе германия // Физика плазмы. -2008. - Т. 34. -№ 4. - С. 340-346.
Downloads
Published
Issue
Section
License
Copyright (c) 2010 Scientific Herald of Uzhhorod University.Series Physics

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish with this journal agree to the following terms:- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).