Assessment of the quality of the labour safety management system in accordance with the requirements of the international standard ISO 45001:2018 at the stage of operation
DOI:
https://doi.org/10.30837/ITSSI.2024.27.226Keywords:
assessment; qualimetry; summary indicator; harmful and dangerous factors; statistical methods; labor safety management system.Abstract
The subject matter of the article is the assessment of the quality of the occupational safety management system. The goal of the article is to develop a methodology for assessment of the occupational safety management system at the stage of operation. The article solves the following task: to investigate the possibility of applying methods for analysing the dynamic characteristics of the occupational safety management system and to develop algorithms and methods for using the criteria of non-parametric statistics. Methods are used: qualimetry and mathematical statistics. The following results were obtained: an analysis of the requirements of the international standard ISO 45001:2018 was carried out to determine the need to monitor, measure and analyse the functioning of the occupational safety management system, which revealed that the effectiveness of the development and implementation of the occupational safety management system depends on the assessment methodology. An analysis of existing research and publications on the evaluation of processes, including those related to occupational safety, is carried out. The methods for evaluating mathematical systems for processing and controlling gross errors and stationarity, which are key to the analysis of occupational safety management processes, are considered. Non-parametric criteria for checking the stationarity of random processes are considered in detail. Sequences of means and means squares are compared with expected values to determine whether rejections of the stationary hypothesis are justified. The expediency of using these methods for analysing occupational safety management systems is determined. The dynamic nature of the processes and the importance of monitoring and data analysis to ensure effective safety management practices are analysed. Conclusions: The application of methods for analysing the dynamic characteristics of the occupational safety management system is substantiated and algorithms and methods for using the criteria of non-parametric statistics are developed, which allow to obtain an assessment of the system, taking into account the limited information about its indicators and the lack of knowledge of the law of their distribution as a random variable.
References
Список літератури
ISO 45001:2018 Occupational health and safety management systems – Requirements with guidance for use. URL: https://www.iso.org/standard/63787.html (дата звернення: 23.02.2024).
Кучерук В. Ю., Глушко М. В. Оцінювання якості відгуків на основі кваліметричного методу "The value of opinion". Науковi працi Вiнницького нацiонального технiчного унiверситету. Вип. 3, Вересень 2022. Р. 1–13. DOI: https://doi.org/10.31649/2307-5376-2022-2-22-34
Ginevicius R., Trishch R., Bilan Y., Lis M., Pencik J. Assessment of the Economic Efficiency of Energy Development in the Industrial Sector of the European Union Area Countries. Energies. 2022. № 15. 3322 р. DOI: https://doi.org/10.3390/en15093322
Stefanovića V., Uroševićb S., Mladenović-Ranisavljevićc I., Stojilkovićd P. Multi-criteria ranking of workplaces from the aspect of risk assessment in the production processes in which women are employed. Safety Science. 2019. № 116. P. 116–126. DOI: https://doi.org/10.1016/j.ssci.2019.03.006
Ginevičius R., Trišč R., Remeikienė R., Zielińska A., Strikaitė-Latušinskaja G. Evaluation of the condition of social processes based on qualimetric methods: The COVID-19 case. Journal of International Studies. 2022. № 15(1). P. 230–249. DOI: https://doi.org/10.14254/2071-8330.2022/15-1/15
Кім Н. І. Узагальнений показник якості об’єктів кваліметрії різної природи. Вісник аграрної науки Причорномор’я. 2021. Вип. 1. С. 94–101. DOI: https://doi.org/10.31521/2313-092X/2021-1(109)-12
Кучерук В. Ю., Глушко М. В. Покращення якості рекомендаційних систем на основі кваліметричних методів вимірювання. Вимірювальна та обчислювальна техніка в технологічних процесах. 2022. Вип. 2, C. 65–72. DOI: https://doi.org/10.31891/2219- 9365-2022-70-2-9
Буданов П. Ф., Бойко Т. Г., Грінченко Г. С., Нечуйвітер О. П., Цихановська І. В. Застосування методів кваліметрії для оцінки комплексних показників якості багатопараметричних об’єктів. Машинобудування. 2022. № 30. С. 73–84. DOI: https://doi.org/ 10.32820/2079-1747-2022-30
Рудик Ю. І. Оцінювання безпеки складних організаційно-технічних систем кваліметричними методами з урахуванням ризиків: дис. д-ра техн. наук: 05.01.02 "Стандартизація, сертифікація та метрологічне забезпечення". 2021. Львів, 312 с.
Черняк О.М., Тріщ Р. М., Денисенко А. М. Методика оцінювання шкідливих чинників, які впливають на здоров’я робітників машинобудівного підприємства. Вісник НТУ "ХПІ", Серія: Нові рішення в сучасних технологіях. 2019. № 5 (1330). С. 70–76. DOI: https://doi.org/10.20998/2413-4295.2019.05.09
Сороколат Н. А., Фатєєва Л. Ю. Оцінювання якості процесів системи управління безпекою праці, згідно вимог міжнародного стандарту ISO 45001:2018. Машинобудування. 2022. № 29. С. 89–96. DOI: https://doi.org/10.32820/2079-1747-2022-29-89-96
Черняк О. М., Сороколат Н. А., Фатєєва Л. Ю., Багаєв І. О., Тріщ Ю. В. Застосування методу інтегрування для отримання комплексного показника безпеки праці. Вісник Національного технічного університету "ХПІ". Серія: Нові рішення в сучасних технологіях. 2023. № 1(15). С. 60–67. DOI: https://doi.org/10.20998/2413-4295.2023.01.08.11
Fisher R. A. Statistical methods for research workers. Edinburgh and London: Oliver and Boyd. 1936. 339 p.
Арпентьєв Б. М., Тріщ Р. М., Лаврентьєва А. В. Статистичні методи як інструмент оцінювання якості. Стандартизація, сертифікація, якість. Науково-технічний журнал. 2004. № 5. С. 67–71.
Тріщ Р. М., Михайлов В. В. Багатомірний статистичний контроль показників якості технологічного процесу. Вісник Хмельницького національного університету. 2005. № 5. Ч. 1, Т. 1 (69): Технічні науки. С. 34–38.
Тріщ Р. М. Оцінка технологічних систем по параметру якості. Вісник Хмельницького національного університету. 2007. № 1. С. 51–54.
Julius B., Piersol A. Random Data : Analysis and Measurement Procedures. Hoboken, New Jersey, John: Wiley and Sons, Incorporated. 1971. 594 p.
References
ISO 45001:2018 "Occupational health and safety management systems – Requirements with guidance for use", available at: https://www.iso.org/standard/63787.html (last accessed: 23.02.2024).
Kucheruk V., Hlushko M. (2022), "Assessing the quality of feedback based on the qualimetric method "The value of opinion"" ["Otsiniuvannia yakosti vidhukiv na osnovi kvalimetrychnoho metodu "The value of opinion""], Scientific papers of Vinnytsia National Technical University, No. 3. Р. 1–13. DOI: https://doi.org/10.31649/2307-5376-2022-2-22-34
Ginevicius, R., Trishch, R., Bilan, Y., Lis, M., Pencik, J. (2022), "Assessment of the Economic Efficiency of Energy Development in the Industrial Sector of the European Union Area Countries", Energies, No. 15, 3322 р. DOI: https://doi.org/10.3390/en15093322
Stefanovića, V., Uroševićb, S., Mladenović-Ranisavljevićc I., Stojilkovićd, P. (2019), "Multi-criteria ranking of workplaces from the aspect of risk assessment in the production processes in which women are employed", Safety Science, No. 116, P. 116–126. DOI: https://doi.org/10.1016/j.ssci.2019.03.006
Ginevičius, R., Trišč, R., Remeikienė, R., Zielińska, A. Strikaitė-Latušinskaja, G. (2022), "Evaluation of the condition of social processes based on qualimetric methods: The COVID-19 case", Journal of International Studies, No. 15(1), P. 230–249. DOI: https://doi.org/10.14254/2071-8330.2022/15-1/154
Kim, N. (2021), "Generalized indicator of qualimetry objects quality of various nature" ["Uzahalʹnenyy pokaznyk yakosti ob'yektiv kvalimetriyi riznoyi pryrody"], Bulletin of Agrarian Science of the Black Sea Coast, No. 1, P. 94–101. DOI: https://doi.org/10.31521/2313-092X/2021-1(109)-12
Kucheruk, V., Hlushko, M. (2022), "Improving the quality of recommender systems based on qualitative measurement methods". ["Pokrashchennia yakosti rekomendatsiinykh system na osnovi kvalimetrychnykh metodiv vymiriuvannia"], Measuring and computing devices in technological processes, No. 2, P. 65–72. DOI: https://doi.org/10.31891/2219- 9365-2022-70-2-9
Budanov, P., Grinchenko, H., Nechuyviter, O., Tsykhanovska, I. (2022), "Application of qualimetry methods to evaluate complex quality indicators of multi-parameter objects" ["Zastosuvannia metodiv kvalimetrii dlia otsinky kompleksnykh pokaznykiv yakosti bahatoparametrychnykh obiektiv"], Engineering, No. 30, P. 73–84. DOI: https://doi.org/ 10.32820/2079-1747-2022-30
Rudyk, Y. (2021), "Safety assessment of complex organizational and technical systems by risk-based qualimetric methods" ["Otsiniuvannia bezpeky skladnykh orhanizatsiino-tekhnichnykh system kvalimetrychnymy metodamy z urakhuvanniam ryzykiv"], dissertation of doctor of technical sciences: 05.01.02 "Standardization, certification and metrological support", Lviv, 312 p.
Cherniak, О., Trishch, R., Denysenko, A. (2019), "Methods of assessing the harmful factors affecting the health of workers of a machine-building enterprise" ["Metodyka otsiniuvannia shkidlyvykh chynnykiv, yaki vplyvaiut na zdorovia robitnykiv mashynobudivnoho pidpryiemstva"], Bulletin of NTU "KhPI". Series: New solutions in modern technologies, No. 5 (1330), P. 70–76. DOI: https://doi.org/10.20998/2413-4295.2019.05.09
Sorocolat, N., Fatieieva, L. (2022), "Quality assessment of the occupational safety management system processes according to the requirements of the ISO 45001:2018 international standard" ["Otsiniuvannia yakosti protsesiv systemy upravlinnia bezpekoiu pratsi, zghidno vymoh mizhnarodnoho standartu ISO 45001:2018"], Engineering, No. 29, P. 89–96. DOI: https://doi.org/10.32820/2079-1747-2022-29-89-96
Cherniak, O., Sorocolat, N., Fatieieva, L., Bahaiev, I., Trishch, Y. (2023), "Application of the integration method to obtain a complex indicator of labor safety" ["Zastosuvannia metodu intehruvannia dlia otrymannia kompleksnoho pokaznyka bezpeky pratsi"], Bulletin of the National Technical University «KhPI» Series: New solutions in modern technologies, No. 1(15), P. 60–67. DOI: https://doi.org/10.20998/2413-4295.2023.01.08.11
Fisher, R. (1936), Statistical methods for research workers, Edinburgh and London: Oliver and Boyd, 339 p.
Arpentiev, B., Trishch, R., Lavrentieva, A. (2004), "Statistical methods as a tool for quality assessment" ["Statystychni metody yak instrument otsiniuvannia yakosti"], Standardisation, certification, quality. Scientific and technical journal, No. 5, P. 67–71.
Trishch, R., Mykhailov, V. (2005), "Multidimensional statistical control of process quality indicators" ["Bahatomirnyi statystychnyi kontrol pokaznykiv yakosti tekhnolohichnoho protsesu"], Bulletin of Khmelnytskyi National University, No. 5, vol. 1 (69): Technical sciences, P. 34–38.
Trishch, R. (2007), "Assessment of technological systems by quality parameter" [Otsinka tekhnolohichnykh system po parametru yakosti], Bulletin of Khmelnytskyi National University, No. 1, P. 51–54.
Julius, B., Piersol, A. (1971), Random Data: Analysis and Measurement Procedures, Hoboken, New Jersey, John: Wiley and Sons, Incorporated, 594 p.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Our journal abides by the Creative Commons copyright rights and permissions for open access journals.
Authors who publish with this journal agree to the following terms:
Authors hold the copyright without restrictions and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-commercial and non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
Authors are permitted and encouraged to post their published work online (e.g., in institutional repositories or on their website) as it can lead to productive exchanges, as well as earlier and greater citation of published work.
