Development of a Perspective Metal Hydride Energy Accumulation System Based on Fuel Cells for Wind Energetics

Authors

Keywords:

fuel cells, metal hydride hydrogen storage battery, energy supply

Abstract

Hydrogen is one of the most energy-intensive and environmentally friendly energy carriers, which is why its use for the operation of fuel cells (FCs) makes it possible to create efficient autonomous energy supply systems. Power plants based on fuel cells are characterized by high efficiency and environmental safety. Of particular interest are power plants based on low-temperature alkaline FCs with a capacity of 1 to 20 kW, because they can be widely used as autonomous power sources for residential consumers. The location of such autonomous installations is assumed to be in close proximity to the energy consumer, which requires that fuel supply systems be highly safe, reliable and environmentally friendly. These requirements are met by hydrogen storage systems based on reversible metal hydrides (MH), capable of absorbing and releasing hydrogen. One of the main components of an autonomous energy supply system is a multiple-action hydrogen metal hydride storage battery. For the efficiency of the "FC - MH hydrogen storage" system, it is necessary to develop a methodology for determining its main technical characteristics both at the stage of creation and in the process of studying these characteristics. The article presents the developed scheme of a wind power plant with a hydrogen energy storage battery, solves the problem of selecting the FC, and analyses the operation of the fuel cell with the MH hydrogen storage system. The results obtained allowed us to determine the pattern between the amount of heat taken from the FC for hydrogen desorption with its subsequent use to increase the power of the FC, and ensure the characteristics of the consumer network. It is shown that the use of an integrated approach to the study of a perspective scheme of accumulation and use of wind energy will solve the problem of smoothing the irregularity of energy supply from renewable sources.

Author Biographies

Yurii M. Matsevytyi, A. Podgorny Institute of Mechanical Engineering Problems of NASU (2/10, Pozharskyi St., Kharkiv, 61046, Ukraine)

Academician of the NASU

Natalia A. Chorna, A. Podgorny Institute of Mechanical Engineering Problems of NASU (2/10, Pozharskyi St., Kharkiv, 61046, Ukraine)

Cand. Sc. (Engineering)

References

Ma, Zh., Eichman, J., & Kurtz, J. (2018). Fuel cell back up power system for grid-service and micro-grid in telecommunication applications. ASME 12th Intern. Conf. on Energy Sustainability, June 24–28, 2018, Lake Buena Vista, FL, USA, pp. 1–9. https://doi.org/10.1115/es2018-7184.

Tarasov, B. P. (2011). Metal-hydride accumulators and generators of hydrogen for feeding fuel cells. International Journal of Hydrogen Energy, vol. 36, iss. 1, pp. 1196–1199. https://doi.org/10.1016/j.ijhydene.2010.07.002.

Chorna, N. A. (2019). Rozrobka vodnevoi systemy rezervuvannia ta akumuliuvannia enerhii na osnovi metalohidrydnykh system zberihannia vodniu [Development of hydrogen system of energy storage on the basis of metal hydride systems of hydrogen storage]. Informatsiini tekhnolohii: nauka, tekhnika, tekhnolohiia, osvita, zdorovia [Information technology: science, technology, technology, education, health]: abstracts of the XXVII International Scientific Conference MicroCAD-2019, May 15-17,2019, in four parts, part I, pp. 273 (in Ukrainian).

Solovey, V. V., Shmalko, Yu. F., & Lototskiy, M. V. (1998). Metallogidridnyye tekhnologii. Problemy i perspektivy [Metal hydride technologies. Problems and prospects]. Problemy mashinostroyeniya – Journal of Mechanical Engineering, vol. 1, no. 1, pp. 115–132 (in Russian).

Matsevityy, Yu M., Solovey, V. V., & Chernaya, N. A. (2006). Povysheniye effektivnosti metallogidridnykh elementov teploispolzuyushchikh ustanovok [Increasing the efficiency of metal hydride elements of heat-using plants]. Problemy mashinostroyeniya – Journal of Mechanical Engineering, vol. 9, no. 2, pp. 85–93 (in Russian).

Solovey, V. V., Koshelnik, A. V., & Chernaya, N. A. (2012). Modelirovaniye teplomassoobmennykh protsessov v metallogidridnykh teploispolzuyushchikh ustanovkakh [Modeling of heat and mass transfer processes in metal hydride heat-using plants]. Promyshlennaya teplotekhnika – Industrial Heat Engineering, vol. 34, no. 2, pp. 48–53 (in Russian).

Solovey, V., Khiem, N. T., Zipunnikov, M. M., & Shevchenko, A. (2018). Improvement of the membrane-less electrolysis technology for hydrogenand oxygen generation. French-Ukrainian Journal of Chemistry, vol. 6, no. 2, pp. 73–79. https://doi.org/10.17721/fujcV6I2P73-79.

Solovey, V., Kozak, L., Shevchenko, A., Zipunnikov, M., Campbell, R., & Seamon, F. (2017). Hydrogen technology of energy storage making use of wind power potential. Journal of Mechanical Engineering, vol. 20, no. 1, pp. 62–68. https://doi.org/10.15407/pmach2017.01.062.

M&M (MarketsandMarkets), (Dallas, TX Market Research Company and Consulting Firm). Аналитический отчет «Fuel Cell Technology Market: By Applications (Portable, Stationary, Transport), Types (PEMFC, DMFC, PAFC, SOFC, MCFC), Fuel (Hydrogen, Natural Gas, Methanol, Anaerobic Digester Gas) & Geography – Global Trends and Forecast to 2018» [Electronic resource]. URL: http://www.marketsandmarkets.com/Market-Reports/fuel-cell-market-348.html.

Downloads

Published

2019-12-25

Issue

Vol. 22 No. 4 (2019)

Section

Non-traditional energy technologies

License

Copyright (c) 2019 Yurii M. Matsevytyi, Yurii M. Matsevytyi, Natalia A. Chorna, Andrii A. Shevchenko, Andrii A. Shevchenko

Creative Commons License

This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.

All authors agree with the following conditions:

  • The authors reserve the right to claim authorship of their work and transfer to the journal the right of first publication of the work under the license agreement (the agreement).
  • Authors have a right to conclude independently additional agreement on non-exclusive spreading the work in the form in which it was published by the jpurnal (for example, to place the work in institution repository or to publish as a part of a monograph), providing a link to the first publication of the work in this journal.
  • Journal policy allows authors to place the manuscript in the Internet (for example, in the institution repository or on a personal web sites) both before its submission to the editorial board and during its editorial processing, as this ensures the productive scientific discussion and impact positively on the efficiency and dynamics of citation of published work (see The Effect of Open Access).