Deformation of Threaded Metal – Composite Couplings Under the Action of Gas-Dynamic Loads
Abstract
The combination of metal and composite in threaded couplings increases the reliability of the structure operating under conditions of intensive internal pressure. Strength analysis of threaded metal – composite couplings based on the application of modern finite element modeling methods at the stage of design documentation development allows to create more efficient structures that better meet the operational requirements. The strength of threaded couplings of cylindrical shells made of composite material and metal under the action of gas-dynamic internal pressure is analyzed in this paper. A methodology for numerical study of the problem in Ansys / Explicit Dynamics software package is proposed. Detailed modeling of threaded couplings is used. The developed model takes into account the following: dependence of material properties on ambient temperature; nonlinear relations between the components of stress and strain tensors in metal elements, orthotropic properties of composite materials; peculiarities of contact interaction in the zones of threaded couplings of prefabricated shell elements made of different materials. The stress state of a cylindrical structure with a central shell made of carbon fiber-reinforced plastic or fiberglass and with steel shells at the edges, loaded with gas-dynamic internal pressure with a maximum value of 20 MPa at a maximum ambient temperature of 100 °С was studied. It was obtained that plastic deformations are concentrated on the edges of the threaded couplings of steel shells. At the same time, the magnitude of plastic coupling deformations with the inner metal shell is an order of magnitude higher than for couplings with the outer metal shell. The magnitude of plastic deformations in couplings with an inner metal shell is twice less when using fiberglass than when using carbon fiber reinforced plastic. Localization of critical stresses was observed only in metal shells at threaded couplings. In this case, in the thread zone they are within the elasticity limits, and the stress state of the FRP shell is not critical. No local material failure was observed in the structure.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 К. В. Аврамов, М. В. Чернобривко, В. В. Комбаров, С. І. Планковський, Є. В. Цегельник
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
All authors agree with the following conditions:
- The authors reserve the right to claim authorship of their work and transfer to the journal the right of first publication of the work under the license agreement (the agreement).
- Authors have a right to conclude independently additional agreement on non-exclusive spreading the work in the form in which it was published by the jpurnal (for example, to place the work in institution repository or to publish as a part of a monograph), providing a link to the first publication of the work in this journal.
- Journal policy allows authors to place the manuscript in the Internet (for example, in the institution repository or on a personal web sites) both before its submission to the editorial board and during its editorial processing, as this ensures the productive scientific discussion and impact positively on the efficiency and dynamics of citation of published work (see The Effect of Open Access).
