Stress-strain state research of fastener in hydraulic turbine flanged connections

Authors

  • В. И. Гнитько A.N. Podgorny Institute for Mechanical Engineering Problems of NAS of Ukraine, Ukraine
  • О. Ф. Полищук A.N. Podgorny Institute for Mechanical Engineering Problems of NAS of Ukraine, Ukraine
  • А. Ю. Черкасский PJSC "Turboatom", Kharkiv, Ukraine
  • Н. А. Ильичева PJSC "Turboatom", Kharkiv, Ukraine
  • С. В. Артемова PJSC "Turboatom", Kharkiv,
  • Е. С. Кононенко PJSC "Ukrneftekhimproject", Kharkiv, Ukraine

Keywords:

flange connection, prestressed, static and dynamic loading, finite element method

Abstract

The technique for numerical analysis of the stress-strain state of the main massive load-bearing fastening the hydraulic turbine equipment with Kaplan runner under static and dynamic loading is developed. The flanged connection operation modeling is reduced to formulation of the contact problem of the bolt–flanges interaction. The finite-element program modules to estimate static and forced vibrations are constructed. The numerical investigations of the static and dynamic stress-strain state of the load-bearing bolted connections for hydraulic turbine ПЛ40–В–700: turbine shaft – runner, turbine shaft – generator shaft, blade – runner have been performed. The tests for cycle fatigue of cylindrical test-pieces of steel grade 25Х1МФ used for manufacture of fasteners are accomplished in the modes of tension–compression and symmetric bending. The fatigue curves for strain-compression and bending of the test-pieces made of steel grade 25Х1МФ are obtained. At the fatigue test in tension-compression mode the number of cycles to failure of the sample is less significant compared with the test on a flat symmetrical bending under the same stresses.

Author Biographies

В. И. Гнитько, A.N. Podgorny Institute for Mechanical Engineering Problems of NAS of Ukraine

PhD

О. Ф. Полищук, A.N. Podgorny Institute for Mechanical Engineering Problems of NAS of Ukraine

PhD

References

STO RusGidro 02.03.107-2013. (2013) Gidroehlektrostancii. Nerazrushayushchij kontrol' krepezhnyh ehlementov otvetstvennyh uzlov gidroagregatov. Metodicheskie ukazaniya: 53.

GOST 20700-75 (ST SEHV 1066-78).(2001) Bolty, shpil'ki, gajki i shajby dlya flancevyh i ankernyh soedinenij, probki i xomuty s temperaturoj sredy ot 0 do 6500S. Tekhnicheskie usloviya. IPK Izdatel'stvo standartov: 23.

Birger I.A. (1979) Raschet na prochnost' detalej mashin. Spravochnik. Mashinostroenie: 702.

Birger I.A. (1973) Rez'bovye soedineniya. Mashinostroenie: 256.

Kovalev N.N. (1961) Gidroturbiny. Konstrukcii i voprosy proektirovaniya: Gos. nauch.-tekhn. izd-vo mashinostroitel'noj literatury: 615.

Iosilevich G.B. (1985)Zatyazhka i stoporenie rez'bovyh soedinenij: Spravochnik. Mashinostroenie: 224.

GOST 25.502-79. (1980) Raschety i ispytaniya na prochnost' v mashinostroenii. Metody mekhanicheskih ispytanij metallov. Metody ispytanij na ustalost'. Izdatel'stvo standartov: 32.

SHkol'nik.L.M. (1978) Metodika ustalostnyh ispytanij: Spravochnik. Metallurgiya: 304

Downloads

Published

2017-03-24

Issue

Vol. 20 No. 1 (2017)

Section

Dynamics and Strength of Machines

License

Copyright (c) 2017 В. И. Гнитько, О. Ф. Полищук, А. Ю. Черкасский, Н. А. Ильичева, С. В. Артемова, Е. С. Кононенко

Creative Commons License

This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.

All authors agree with the following conditions:

  • The authors reserve the right to claim authorship of their work and transfer to the journal the right of first publication of the work under the license agreement (the agreement).
  • Authors have a right to conclude independently additional agreement on non-exclusive spreading the work in the form in which it was published by the jpurnal (for example, to place the work in institution repository or to publish as a part of a monograph), providing a link to the first publication of the work in this journal.
  • Journal policy allows authors to place the manuscript in the Internet (for example, in the institution repository or on a personal web sites) both before its submission to the editorial board and during its editorial processing, as this ensures the productive scientific discussion and impact positively on the efficiency and dynamics of citation of published work (see The Effect of Open Access).