Optimization of thermal drying of liquid glass mixture according to tensile strength criterion
DOI:
https://doi.org/10.15587/2313-8416.2016.69970Keywords:
magnetic field strength, mixture preparation section, liquid glass mixtureAbstract
Mathematical simulation of thermal drying of magnetized liquid glass mixture is done. It is shown that in the investigated range of input variables - magnetic field strength and drying time, the optimum process parameters are 143493 A/m and 5 min respectively. Principal possibility of increasing the tensile strength of the sample up to 3.2 kg/cm2 is observed under such values of the parameters
References
Akimov, O. V. (2003). Analysis of errors in formshaping of casts of turbo compressor turbine wheels for combustion engine supercharge at the stage of their wax models production. Eastern-European Journal of Enterprise Technologies, 3 (3), 16–24.
Akimov, O. V., Anackij, Ju. P., Soloshenko, V. A. (1999). Analiz sobstvennyh kolebanij otlivki blok-kartera dizelja “SMD”. Vestnik Har'kovskogo gosudarstvennogo politehnicheskogo universiteta, 66, 40–47.
Ponomarenko, O. I., Evtushenko, N. S., Berlizeva, T. V. (2011). Vlijanie zhidkih otverditelej s raznymi dobavkami na svojstva zhidkostekol'nyh smesej. Litejnoe proizvodstvo, 4, 21–24.
Kuryn, M. G. (2011). Determination of optimum performance liquid glass of magnetization mixtures with liquid glass. Technology audit and production reserves, 2 (2), 14–20. Available at: http://journals.uran.ua/tarp/article/view/4860/4511
Kuryn, M. G. (2012). Synthesis of cold-hardening mixtures with given set of properties and optimization of technological regimes of their manufacturing. Technology audit and production reserves, 1 (3), 25–29. Available at: http://journals.uran.ua/tarp/article/view/4872/4523
Ponomarenko, O. I., Berlizeva, T. V. (2011). Matematicheskie modeli svojstv dlja holodnotverdejushhej smesi (HTS) na osnove zhidkogo stekla. Lit'e: Promyshlennyj investicionnyj forum. Zaporozhskaja torgovo-promyshlennaja palata, 150–151.
Domin, D. A. (2013). Artificial orthogonalization in searching of optimal control of technological processes under uncertainty conditions. Eastern-European Journal of Enterprise Technologies, 5 (9 (65)), 45–53. Available at: http://journals.uran.ua/eejet/article/view/18452
Frolova, L. V. (2011). Identification provision of energy saving on the basis of audit process moulding machines shaking. Technology audit and production reserves, 2 (2 (2)), 8–13. Available at: http://journals.uran.ua/tarp/article/view/4859/4510
Domin, D. A. (2011). Methodology of forming functional in the optimal control electric smelting. Technology audit and production reserves, 1 (1(1)), 15–24. Available at: http://journals.uran.ua/tarp/article/view/4082/3748
Frolova, L. V. (2012). Choice of ways to improve design elements of machines moulding shaking. Technology audit and production reserves, 1 (1(3)), 30–34. Available at: http://journals.uran.ua/tarp/article/view/4873/4524
Evtushenko, N. S., Shinskij, O. I., Ponomarenko, O. I. (2013). Issledovanie svojstv regeneriruemyh smesej na osnove OFOS. Kompressornoe i jenergeticheskoe mashinostroenie, 4, 48–51.
Berlizeva, T. V., Ponomarenko, O. I., Karateev, A. M., Litvinov, D. A. (2013). Vlijanie furfuriloksipropilciklokarbonatov (FOPCK) s razlichnymi dobavkami na svojstva holodnotverdejushhih smesej na zhidkom stekle. Kompressornoe i jenergeticheskoe mashinostroenie, 3, 26–29.
Domin, D. A. (2013). Mathematical modeling in the problem of selecting opti-mal control of obtaining alloys for machine parts in un-certainty conditions. Problems of mechanical engineering, 16 (6), 15–23. Available at: http://journals.uran.ua/jme/article/view/21309/36478
Berg, L. I., Ivanov, N. H., Pravoshinskij, A. L. (1972). Omagnichivanie zhidkostekol'nyh smesej. Litejnoe proizvodstvo, 9, 25.
Domin, D. O. (1995). Dejaki aspekty upravlinnja jakistju chavunu z plastynchastym grafitom. Kharkiv, 181.
Downloads
Published
Issue
Section
License
Copyright (c) 2016 Владислав Владиславович Голиньков, Павел Сергеевич Зинченко, Сергей Александрович Старых, Максим Андреевич Ступар
This work is licensed under a Creative Commons Attribution 4.0 International License.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.
