Мониторинг качества отливок для использования в системах автоматизированного проектирования технологий литейного производства
DOI :
https://doi.org/10.15587/2313-8416.2017.99442Mots-clés :
автоматизированное проектирование, технологии литейного производства, отливка, размерный анализ, размерная точностьRésumé
Проведен мониторинг размерной точности отливки «втулка», изготавливаемой в условиях автоматизированного литейного производства. Установлены реальные возможности существующего технологического процесса по обеспечению заданных требований качества к размерной точности. Выявлены систематические погрешности и проанализированы их причины. Описанная процедура, как пример, может быть рекомендована для использования в системах автоматизированного проектирования литейного производства
Références
Nosenko, T. I., Lysenko, T. V., Stanovskij, A. L. (2008). Adaptivnoe avtomatizirovannoe sinhroniziruyushchee proektirovanie sistemy "otlivka-peschanaya forma" NTI. Zbirnyk naukovykh prats' Odes'koyi natsional'noyi mors'koyi akademiyi, 13, 82–88.
Kostrova, G. V., Lysenko, T. V., Bondar, A. A. (2009). Metody samosinhronizacii dinamicheskih processov SAPR litejnogo proizvodstva KGV. Trudy Odesskogo politekhnicheskogo universiteta, 2 (32), 7–10.
Demin, D. A. (2014). Mathematical description typification in the problems of synthesis of optimal controller of foundry technological parameters. Eastern-European Journal of Enterprise Technologies, 1 (4 (67)), 43–56. doi: 10.15587/1729-4061.2014.21203
Demin, D. A. (2013). Adaptive modeling in problems of optimal control search termovremennoy cast iron. Eastern-European Journal of Enterprise Technologies, 6 (4 (66)), 31–37. Available at: http://journals.uran.ua/eejet/article/view/19453/17110
Demin, D. A. (2013). Mathematical modeling in the problem of selecting optimal control of obtaining alloys for machine parts in un-certainty conditions. Problems of mechanical engineering, 6, 15–23.
Lysenko, T. V., Koryachenko, A. A., Docenko, V. P. (2010). Identifikaciya lica, vypolnivshego reshenie, pri distancionnoj podgotovke specialistov-litejshchikov. Nauchnyj Vestnik Donbasskoj gosudarstvennoj mashinostroitel'noj akademii, 1, 132–137.
Akimov, O. V., Koval, O. S., Pulyaev, A. A., Dymko, E. P., Egorenko, T. A., Vysockij, S. V. (2015). Quality improvement of cast parts of ice: accounting technological aspects of the automated foundry. Eastern-European Journal of Enterprise Technologies, 6 (1 (78)), 56–62. doi: 10.15587/1729-4061.2015.56039
Akimov, O. V. (2003). Analiz pogreshnostej formoobrazovaniya otlivok koles turbin turbokompressorov dlya nadduva DVS na ehtape izgotovleniya ih voskovyh modelej. Eastern-European Journal of Enterprise Technologies, 3 (3), 16–24. Available at: http://nbuv.gov.ua/UJRN/Vejpte_2003_3_4
Chibichik, O. A. (2007). Analiz tekhnologicheskogo processa zalivki rotorov ehlektrodvigatelya i vozmozhnye puti ego usovershenstvovaniya. Eastern-European Journal of Enterprise Technologies, 6 (1 (30)), 55–60.
Akimov, O. V., Chibichik, O. A., Red'kina, A. V. (2013). Improvement of technical processes for producing cast rotor parts to increase performance characteristics of traction elecric drive. Problems of mechanical engineering, 16 (5), 7–12.
Ponomarenko, O. I., Trenyov, N. S. (2013). Computer modeling of crystallization processes as a reserve of improving the quality of pistons of ICE. Technology audit and production reserves, 6 (2 (14)), 36–40. Available at: http://journals.uran.ua/tarp/article/viewFile/19529/17205
Demin, D. A. (2013). Artificial orthogonalization in searching of optimal control of technological processes under uncertainty conditions. Eastern-European Journal of Enterprise Technologies, 5 (9 (65)), 45–53. Available at: http://journals.uran.ua/eejet/article/view/18452/16199
Berlizeva, T. V., Ponomarenko, O. I., Karateev, A. M., Litvinov, D. A. (2013). Vliyanie furfuriloksipropilciklokarbonatov (FOPCK) s razlichnymi dobavkami na svojstva holodnotverdeyushchih smesej na zhidkom stekle. Kompressornoe i ehnergeticheskoe mashinostroenie, 3, 26–29.
Ponomarenko, O. I., Evtushenko, N. S., Berlizeva, T. V. (2011). Vliyanie zhidkih otverditelej s raznymi dobavkami na svojstva zhidkostekol'nyh smesej. Litejnoe proizvodstvo, 4, 21–24.
Demin, D. A. (2014). Quality Control at foundries technological aspects in selection of optimal strategies for technical reequipment. Bulletin of NTU “KhPI”. Series: New desicions of modern technologies, 7 (1050), 42–52.
Téléchargements
Publié-e
Numéro
Rubrique
Licence
(c) Tous droits réservés Iegor Dymko, Dmytro Marynenko, Serhii Borysenko, Irina Loek, Vladislav Anan'in 2017
![Licence Creative Commons](http://i.creativecommons.org/l/by/4.0/88x31.png)
Cette œuvre est sous licence Creative Commons Attribution 4.0 International.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.