Oleg Akimov

National Technical University «Kharkiv Polytechnic Institute», Ukraine
Doctor of Technical Sciences, Professor, Head of Departament
Departament of Foundry

Scopus ID: 7003280394
Web of Science profile: link
Google Scholar profile: link
ORCID ID: https://orcid.org/0000-0001-7583-9976

TOP-5 publications:

  1. Idan, A. F. І., Akimov, O., Golovko, L., Goncharuk, O., Kostyk, K. (2016). The study of the influence of laser hardening conditions on the change in properties of steels. Eastern-European Journal of Enterprise Technologies, 2(5 (80)), 69. doi: https://doi.org/10.15587/1729-4061.2016.65455
  2. Idan, A. F. І., Akimov, O., Kostyk, K. (2017). Development of a combined technology for hardening the surface layer of steel 38Cr2MoAl. Eastern-European Journal of Enterprise Technologies, 2(11 (86)), 56–62. doi: https://doi.org/10.15587/1729-4061.2017.100014
  3. Akimov, O. V., Alokhin, V. I., Penzev, P. S., Dyachenko, A. V., Ovcharenko, A. M. (2015). Analysis of technological factors that significantly affect the formation of stresses in the cast machine parts. Eastern-European Journal of Enterprise Technologies, 6(7 (78)), 43. doi: https://doi.org/10.15587/1729-4061.2015.56199
  4. Akimov, O. V., Nuri, S. M. (2015). The effect of heat treatment on the properties of the new iron-base alloy. Eastern-European Journal of Enterprise Technologies, 6(11 (78)), 35. doi: https://doi.org/10.15587/1729-4061.2015.56370
  5. Akimov, O. V., Alokhin, V. I., Marchenko, A. P. (2010). Komp'yuternoye modelirovaniye protsessov pri proizvodstve litykh detaley dvigatelya. Liteynoye proizvodstvo, 9, 31—33.

NEW-5 publications:

  1. Akimov, O., Alyokhin, V., Kostyk, K., Saltykov, L., Riabets, J. (2020). Computer-Integrated Design Pistons with the Influence of Casting Defects. In Advances in Design, Simulation and Manufacturing III. Springer International Publishing, 13–22. doi: https://doi.org/10.1007/978-3-030-50794-7_2
  2. Alawee, W. H., Dhahad, H. A., Mohammed, S. A., Khrypunov, M., Akimov, O. (2020). Influence of Cadmium Telluride Films’ Processing Types on Efficiency of Solar Cells. Advanced Manufacturing Processes, 385–394. doi: https://doi.org/10.1007/978-3-030-40724-7_39
  3. Akimov, O., Soloshenko, V., Kostyk, K. (2019). Computer-integrated design of cast parts on the criterion of performance on the example of the turbine wheel turbocharger. CEUR Workshop Proceedings, 2353, 324–338.
  4. Abed Dhahad, H., Hameed Alawee, W., Marchenko, A., Klets, D., Akimov, O. (2018). Evaluation of Power Indicators of the Automobile Engine. International Journal of Engineering & Technology, 7 (4.3), 130. doi: https://doi.org/10.14419/ijet.v7i4.3.19722
  5. Mohammed, A. S., Akimov, O., Kostyk, K. (2017). Development of an iron-based alloy with a high degree of shape recovery. Eastern-European Journal of Enterprise Technologies, 3 (12 (87)), 30–37. doi: https://doi.org/10.15587/1729-4061.2017.103523