Parthasarathy Sampathkumaran

Sambhram Institution of Technology, India
Professor
Department of Mechanical Engineering

Scopus ID: 6603025212
Researcher ID: DRR-0143-2022
ORCID ID: https://orcid.org/0000-0002-4683-6626

Selected Publications:

  1. Sagar, K. G., Suresh, P. M., Sampathkumaran, P., Kishore. (2023). Tribological studies on aluminum beryl composites subjected to ECAP process. Wear, 523, 204775. doi: https://doi.org/10.1016/j.wear.2023.204775

  2. Padmini, B. V., Bhosale, D. G., Niranjan, H. B., Mathapati, M., Sampathkumaran, P. (2023). High-temperature dry sliding wear behavior of cold-sprayed inconel 738 coating. Surface Review and Letters, 30 (2). doi: https://doi.org/10.1142/s0218625x23500063

  3. Rajesh, R., Kulkarni, M. V., Sampathkumaran, P., Anand Kumar, S., Seetharamu, S., Katiyar, J. K. (2022). Tribological Performance Involving DOE of an Additively Manufactured Cu-Ni Alloy. Industrial Tribology, 75–96. doi: https://doi.org/10.1201/9781003243205-5

  4. Deepthi, M. V., Sharma, M., Sailaja, R. R. N., Anantha, P., Sampathkumaran, P., Seetharamu, S. (2010). Mechanical and thermal characteristics of high density polyethylene–fly ash Cenospheres composites. Materials & Design, 31 (4), 2051–2060. doi: https://doi.org/10.1016/j.matdes.2009.10.014

  5. Kishore, Sampathkumaran, P., Seetharamu, S., Vynatheya, S., Murali, A., Kumar, R. K. (2000). SEM observations of the effects of velocity and load on the sliding wear characteristics of glass fabric–epoxy composites with different fillers. Wear, 237 (1), 20–27. doi: https://doi.org/10.1016/s0043-1648(99)00300-2

  6. Kumar, R. K., Kamaraj, M., Seetharamu, S., Pramod, T., Sampathkumaran, P. (2016). Effect of Spray Particle Velocity on Cavitation Erosion Resistance Characteristics of HVOF and HVAF Processed 86WC-10Co4Cr Hydro Turbine Coatings. Journal of Thermal Spray Technology, 25 (6), 1217–1230. doi: https://doi.org/10.1007/s11666-016-0427-3

  7. Kishore, Sampathkumaran, P., Seetharamu, S., Thomas, P., Janardhana, M. (2005). A study on the effect of the type and content of filler in epoxy–glass composite system on the friction and slide wear characteristics. Wear, 259 (1-6), 634–641. doi: https://doi.org/10.1016/j.wear.2005.03.003