Development of the method of constructing the graphic model of textile packages by experimental data

Authors

DOI:

https://doi.org/10.15587/2312-8372.2018.135763

Keywords:

images of the shadow projection, bobbin forms, cross-sections at the butt ends, pattern recognition

Abstract

The object of research is methods for analyzing the geometric parameters of textile packages formatted on machines with separate processes of yarn formation and winding. One of the most problematic places for analyzing the deviation of the shape of packages from the required is a large amount of information about the coordinates of the points of the surface of the package obtained as a result of measurements. Elimination of this problem is possible due to the creation of a volumetric packing model that allows to visually assess the presence of defects on the package surface and carry out a subsequent quantitative analysis.

In the course of the research, an experimental method is proposed for obtaining primary data characterizing the shape of individual meridional sections of the package. An experimental setup has been developed that makes it possible to obtain data and store it in digitized form, and a method for converting the data obtained into a volumetric geometric model of a textile package.

It is established that the developed model allows to obtain a number of single indicators of deviation of the shape of the bobbins from the given one and further to work on the formation of a complex index for evaluating the quality of the bobbin shape. Complex evaluation of the quality of the package form can be obtained by the weighted average method. The average weighted index is constructed as a dependence, the arguments of which are single quality indicators and parameters of their weight.

The estimation of applicability of the developed complex indicator for the analysis of the form of packages is carried out. To do this, the package lot analysis is carried out, which confirmed the reproducibility of the package shape analysis process with the help of the proposed complex indicator, as well as the correspondence of the estimates obtained by the proposed method to visual estimates.

The method of complex quantitative evaluation of the form of packages, presented in this paper, allows to carry out optimization experiments and on their basis to assign such adjustable parameters of winding mechanisms that will allow to receive packages of the required quality. When developing new winding equipment, it will be possible to lay down the necessary mechanisms for regulating the winding process.

Author Biographies

Mahamadali Nuriyev, Azerbaijan State Economic University (UNEC), 6, Istiglaliyyat str., Baku, Azerbaijan, AZ1001

Doctor of Technical Sciences, Professor

Department of Standardization and Certification

Ilham Seydaliyev, Azerbaijan State Economic University (UNEC), 6, Istiglaliyyat str., Baku, Azerbaijan, AZ1001

PhD, Associate Professor

Department of Standardization and Certification

Kamala Dadashova, Azerbaijan State Economic University (UNEC), 6, Istiglaliyyat str., Baku, Azerbaijan, AZ1001

PhD, Senior Lecturer

Department of Standardization and Certification

Ganira Jabbarova, Azerbaijan State Economic University (UNEC), 6, Istiglaliyyat str., Baku, Azerbaijan, AZ1001

Lecturer

Department of Consumer Goods Expertise

References

  1. Nuriyev, M., Dadashova, K., Radzhabov, I. (2016). Development of Methods for Recognition of Structural Defects Using Package Surface Image. ScienceRise, 4 (2 (21)), 6–10. doi: http://doi.org/10.15587/2313-8416.2016.66143
  2. Jhatial, R. A., Peerzada, M. H., Syed, U. (2016). Optical Yarn Assessment System for Twist Measurement in Rotor-Spun Yarn. Mehran University Research Journal of Engineering and Technology, 34 (1), 25–32.
  3. Fu, J., Yun, J., Kim, J.-S., Jung, Y. (2016). Real-time graphic visualization of filament band winding for fiber-reinforced cylindrical vessels. Journal of Composite Materials, 50 (16), 2165–2175. doi: http://doi.org/10.1177/0021998315602325
  4. Nuriyev, M. N., Musayeva, T. T. (2016). Development of Algorithms Surface Recognition Forging Cross Winding. Bulletin of NTU “KhPI” Series: Mechanical-technological systems and complexes, 49 (1221), 52–55.
  5. Alphabetic Index of Functions. Developer Connection. Available at: http://mirror.informatimago.com/next/developer.apple.com/documentation/QuickTime/APIREF/INDEX/funcalphaindex.htm
  6. Nuriev, M. N., Kiselev, P. N. (2007). Analiz mekhanicheskikh metodov kontrolya geometricheskikh parametrov pakovok. Teoreticheskaya i prikladnaya mekhanika, 4, 110–115.
  7. Nuriyev, M. N. (2016). Destructive Methods of Controlling the Density Distribution of the Winding Body. Progressive Technologies and Systems of Mechanical Engineering, 4 (55), 44–48.
  8. Nuriyev, M. N., Imanova, G. M. (2016). Mechanical and Optical Methods and Means of Controlling Geometric Sizes and Shapes of Textile Packages. Bulletin of Science and Practice, 5 (6), 65–74.
  9. Stepanov, V. A., Noskov, M. P., Gurevich, T. M., Kuznetsov, G. K. (1984). Eksperimental'noe issledovanie plotnosti namotki tekstil'nykh pakovok. Izvestiya vuzov. Tekhnologiya tekstil'noy promyshlennosti, 3, 112–115.
  10. Zhariy, Yu. I., Troshchanovskiy, A. A., Svirid, S. A. (1988). K analizu raspredeleniya osevoy plotnosti pakovok krestovoy namotki. Izvestiya vuzov Tekhnologiya tekstil'noy promyshlennosti, 5, 61–64.
  11. Rudovsky, P. N. (1995). Influence of Parameters of the Winding Mechanism on Laying Coils in Tourniquet Formation. News of Higher Educational Institutions, Technology of Textile Industry, 6, 108–111.
  12. Kafique, A. J., Mazhar, H. P., Uzma, S. (2016). Optical Yarn Assessment System for Twist Measurement in Rotor-Spun Yarn. Mehran University Research Journal of Engineering and Technology, 34 (1), 25–32.
  13. Makarov, I. M., Vinogradskaya, T. M., Rubchinskiy, A. A., Sokolov, V. B. (1982). Teoriya vybora i prinyatiya resheniy. Moscow: Nauka, 195.
  14. Rudovskiy, P. N., Nuriev, M. N., Yusupov, F. Sh. (1994). Analiz formirovaniya zhgutovoy namotki s tochki reniya silovykh vzaimodeystviy nitey. Uzbekskiy zhurnal «Problemy mekhaniki», 2, 29–31.
  15. Ashhepkova, N. S. (2015). Mathcad in the Kinematic and Dynamic Analysis of the Manipulator. Eastern-European Journal of Enterprise Technologies, 5 (7 (77)), 54–63. doi: http://doi.org/10.15587/1729-4061.2015.51105
  16. Fu, J., Yun, J., Kim, J.-S., Jung, Y. (2015). Real-time graphic visualization of filament band winding for fiber-reinforced cylindrical vessels. Journal of Composite Materials, 50 (16), 2165–2175. doi: http://doi.org/10.1177/0021998315602325
  17. Jhatial, R. A., Peerzada, M. H., Syed, U. (2016). Optical Yarn Assessment System for Twist Measurement in Rotor-Spun Yarn. Mehran University Research Journal of Engineering and Technology, 34 (1), 25–32.
  18. Liangxue, L. (2015). Control System for Textile Winding Machine Convenient for Loading of Bobbin. (2015): IPC: B65H54/547, B65H63/00, B65H67/04, CN104386539 (A).
  19. Sistema kontrolya bobin. Automatic bobbin laser inspector. (1997). International textil Buletin. Chemiefasern-textilindustrie, 47 (4), 304.
  20. Sistema kontrolya pakovok. New laser inspection system for POY and DTY packages. (1996). Text. Technol. Dig., 53 (6), Pt. 2, 90.
  21. Kuchin, A. A., Obradovich, K. A. (1981). Opticheskie pribory dlya izmereniya sherokhovatosti poverkhnosti. Leningrsd: Mashinostroenie, 197.
  22. Kiselev, P. N., Rudovskiy, P. N., Palochkin, S. V. (2004). Programmnoe obespechenie dlya postroeniya trekhmernoy modeli pakovki. Vestnik Kostromskogo gosudarstvennogo tekhnologicheskogo universiteta (KGTU), 9, 87–89.
  23. Rudowskij, P. N. (1997). Kontrole des spulenaufbau bei wilder wicklung. Melliand Textilberichte, 3, 138.
  24. Nuraddin-Nuriyev, M., Ali-Veliyev, F., Insaf-Həmidov, H., Aqagul-Sailov, R., Mahamad-Seydaliyev, I., Zargar-Jabbarova, G. (2018). Development of a Device for Continuously Monitoring the Parameters of the Winding Structure of Textile Bobbins. Ingeniería Solidaria, 14 (24), 1–15.

Downloads

Published

2018-01-23

How to Cite

Nuriyev, M., Seydaliyev, I., Dadashova, K., & Jabbarova, G. (2018). Development of the method of constructing the graphic model of textile packages by experimental data. Technology Audit and Production Reserves, 3(1(41), 4–10. https://doi.org/10.15587/2312-8372.2018.135763

Issue

Vol. 3 No. 1(41) (2018): Industrial and Technology Systems

Section

Mechanical Engineering Technology: Original Research

License

Copyright (c) 2018 Ilham Seydaliyev, Mahamadali Nuriyev, Kamala Dadashova, Ganira Jabbarova

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.