Identification of the behavior of properties of a cold-hardening glass-liquid mixture with propylene-carbonate different in dosing components

Authors

DOI:

https://doi.org/10.15587/2312-8372.2019.169748

Keywords:

cold-hardening mixture, propylene carbonate, liquid glass, properties of the mixture, dosing of components, canonical transformation of the response surface

Abstract

The object of research are models that describe the effect of liquid glass and propylene carbonate as a hardener of the molding mixture on its properties. One of the most problematic places is determination of the behavior of the properties of the mixture under conditions of deviation from the optimal values of the content of liquid glass as a binder and propylene carbonate as a hardener. The definition of such behavior is important because it will improve the processes of regulating the loading of mixers in automated systems for the manufacture of the mixture in foundries.

The methods of canonical transformation of response surfaces are used, describing the effect of the content of liquid glass and propylene carbonate on the following properties of the mixture: survivability, compressive strength after 1 hour, after 3 hours, after 24 hours, crumbling. The mechanisms of chemical reactions that lead to the process of mixture curing are described and the possibility of obtaining qualitative characteristics of the mixture is substantiated by analyzing the chemistry of the process.

An analytical description of the response surface in the stationary region in the factor space transformed after the standard procedure “liquid glass content – propylene carbonate content” is obtained in canonical form. Such a transformation allows to estimate the nature of the response surface by analyzing the ratios of the eigenvalues included in its canonical description in terms of size and sign. Such an approach used has an important feature, since it allows one to directly determine the behavior of the properties of the mixture in the event of deviations from the optimal values of the content of liquid glass and propylene carbonate.

This makes it possible to determine measures or technical solutions for the work or to improve the systems for regulating dosing processes in automated systems for the production of a mixture in foundries. At the same time, adaptation to any known dosing systems of binder and hardeners of cold-hardening mixtures is possible. This opens up prospects for stabilizing the quality of the molding or core mixture and improving the quality of shaped castings for mechanical engineering, in particular, responsible and basic cast parts of internal combustion engines (ICE).

Author Biographies

Oleg Akimov, National Technical University «Kharkiv Polytechnic Institute», 2, Kyrpychova str., Kharkiv, Ukraine, 61002

Doctor of Technical Sciences, Professor, Head of Department

Department of Foundry

Pavel Penzev, National Technical University «Kharkiv Polytechnic Institute», 2, Kyrpychova str., Kharkiv, Ukraine, 61002

Assistant

Department of Foundry

Dmytro Marynenko, National Technical University «Kharkiv Polytechnic Institute», 2, Kyrpychova str., Kharkiv, Ukraine, 61002

Postgraduate Student

Department of Foundry

Leonid Saltykov, National Technical University «Kharkiv Polytechnic Institute», 2, Kyrpychova str., Kharkiv, Ukraine, 61002

Postgraduate Student

Department of Foundry

References

  1. Еvtushenko, N. S., Shinskii, O. I., Ponomarenko, O. I. (2013). Issledovanie svoistv regeneriruemykh smesei na osnove OFOS. Kompressornoe i energeticheskoe mashinostroenie, 4, 48–51.
  2. Ponomarenko, O. I., Еvtushenko, N. S., Berlizeva, T. V. (2011). Vliianie zhidkikh otverditelei s raznymi dobavkami na svoistva zhidkostekolnykh smesei. Liteinoe proizvodstvo, 4, 21–24.
  3. Berlizeva, T. V., Ponomarenko, O. I., Karateev, A. M., Litvinov, D. A. (2013). Vliianie furfuriloksipropilciklokarbonatov (FOPCK) s razlichnymi dobavkami na svoistva kholodnotverdeiushchikh smesei na zhidkom stekle. Kompressornoe i energeticheskoe mashinostroenie, 3, 26–29.
  4. Zinchenko, P. S., Aksenenko, M. P., Iovbak, A. V., Orendarchuk, Iu. V. (2016). Application of liquid glass mixtures with reduced content of liquide glass as a factor in improving the quality of machine-building castings. ScienceRise, 5 (2 (22)), 6–9. doi: http://doi.org/10.15587/2313-8416.2016.69836
  5. Orendarchuk, Iu. V., Krasnoukhova, A. A., Achkasov, І. O., Barsuk, A. S., Golovko, V. І. (2016). Optimіzacіia skladu formuvalnikh sumіshei dlia avtomatizovanogo virobnictva litikh detalei dvigunіv vnutrіshnogo zgoriannia. Vіsnik NTU “KHPІ», 50 (1222), 117–121
  6. Zinchenko, P. S., Golinkov, V. V., Starykh, S. A., Stupar, M. A. (2016). Optimization of thermal drying of liquid glass mixture according to tensile strength criterion. ScienceRise, 6 (2 (23)), 9–13. doi: http://doi.org/10.15587/2313-8416.2016.69970
  7. Dotsenko, V., Boichuk, V., Fedorenko, V., Tsybulskyi, Y. (2018). Obtaining of locally optimal solutions by combining properties of mixtures for foundry manufacture. EUREKA: Physics and Engineering, 6, 48–53. doi: http://doi.org/10.21303/2461-4262.2018.00795
  8. Kovalenko, B. P., Demin, D. A., Bozhko, A. B. (2006). Optimizaciia sostava kholodnotverdeiushchikh smesei (KHTS) s propilenkarbonatom. Eastern-European Journal of Enterprise Technologies, 6, 59–61.
  9. INTENSIVE MIXER. Available at: http://www.belloi.it/
  10. Durchlaufmischer. Available at: https://www.webac-gmbh.de/produkte/uebersicht/
  11. DISA. Mixers and SMC. Available at: https://www.disagroup.com/en-gb/products/sand-preparation-and-cooling/mixers-and-smc
  12. Hartmann, K., Lezki, E., Schafer, V. (1977). Planirovanie eksperimenta v issledovanii tekhnologicheskikh processov. Мoscow: Mir, 552.
  13. Demin, D. (2017). Synthesis of optimal control of technological processes based on a multialternative parametric description of the final state. Eastern-European Journal of Enterprise Technologies, 3 (4 (87)), 51–63. doi: http://doi.org/10.15587/1729-4061.2017.105294
  14. Demin, D. (2017). Strength analysis of lamellar graphite cast iron in the «carbon (C) – carbon equivalent (Ceq)» factor space in the range of C = (3,425-3,563) % and Ceq = (4,214-4,372) %. Technology Audit and Production Reserves, 1 (1 (33)), 24–32. doi: http://doi.org/10.15587/2312-8372.2017.93178

Published

2018-12-31

How to Cite

Akimov, O., Penzev, P., Marynenko, D., & Saltykov, L. (2018). Identification of the behavior of properties of a cold-hardening glass-liquid mixture with propylene-carbonate different in dosing components. Technology Audit and Production Reserves, 2(3(46), 4–9. https://doi.org/10.15587/2312-8372.2019.169748

Issue

Section

Chemical and Technological Systems: Original Research