Parametric analysis of paper machine as object of automatic control

Authors

  • Анатолій Іванович Жученко National Technical University of Ukraine “Kyiv Polytechnic Institute”, 37, Prospect Peremohy, 03056, Kyiv-56, Ukraine https://orcid.org/0000-0002-1552-8372
  • Євгеній Сергійович Черьопкін National Technical University of Ukraine “Kyiv Polytechnic Institute”, 37, Prospect Peremohy, 03056, Kyiv-56, Ukraine https://orcid.org/0000-0002-1552-8372

DOI:

https://doi.org/10.15587/2312-8372.2014.23451

Keywords:

paper manufacture technology, paper machine, automation, control effects, perturbation

Abstract

The results of analyzing the process of paper manufacture on the paper machine (PM) in terms of automatic control problems are given in the paper. They are presented in the form of parametric schemes of each part of the PM indicating the main input and output variables, as well as control and perturbation effects. Wire, drying and press parts, sections of pulp preparation, wet washing, screening, inlet and calender are considered in the paper.

Construction of parametric schemes is the first step in creating an automatic control system. Based on the obtained results, it is concluded that the most attention from the point of view of control should be given to the PM drying section and calender. The conclusion is associated with a large number of perturbations, acting on these processes and negatively affecting the quality of the finished products but also lead to increasing production costs. With the set parameters of the PM processes, it is possible to formulate an optimal control problem that is the next step in creating an automatic control system.

Author Biographies

Анатолій Іванович Жученко, National Technical University of Ukraine “Kyiv Polytechnic Institute”, 37, Prospect Peremohy, 03056, Kyiv-56

Doctor of Technical Sciences, Professor , Head of Department

Department of Automation of Chemical Production

Євгеній Сергійович Черьопкін, National Technical University of Ukraine “Kyiv Polytechnic Institute”, 37, Prospect Peremohy, 03056, Kyiv-56

Assistant

Department of Automation of Chemical Production

References

  1. Фляте, Д. М. Технология бумаги [Текст]/ Д. М. Фляте. – М.: Лесная промышленность, 1988. – 440 с.
  2. Иванов, С. Н. Технология бумаги [Текст]: учеб. пособ./ С.Н. Иванов. – М.: Гослесбумиздат, 1960. – 719 с.
  3. Кваско, М. З. Автоматичне керування напірним ящиком із повітряною подушкою [Текст]/ М. З. Кваско, М. С. Піргач, А. В. Жихарєва// Xімічна інженерія, eкологія та ресурсозбереження. – Київ, 2009. – №1. – С. 54-58.
  4. Малков, В. Г. Модернизация бумаго-, картоноделательных и сушильных машин [Текст]/ В. Г. Малков// Целлюлоза, бумага, картон. – Москва, 2005. – № 6. – С. 52.
  5. Ицкович, Э. Л. Рациональная последовательность модернизации существующих систем автоматизации производства [Текст]/ Э. Л. Ицкович// Промышленные АСУ и контроллеры. – Москва, 2005. – № 1. – С. 11.
  6. Akesson, J. Parameter optimization of a paper machine model [Text]/ J. Akesson, J. Ekvall// Modelica. – 2006. – Section 4. – P. 411-420.
  7. Гринченко, И. А. Совершенствование систем управления процессом сушки бумаги [Текст]// И. А. Гринченко, В. В. Пожитков, Ю. С. Жукова// Целлюлоза. Бумага. Картон. – Москва, 2009. – № 1. – С. 80-81.
  8. Секушин, Н. А. Технологические процессы и производства [Текст]: метод. указ. для подг. диплом. спец. по напр. 651900 «Автоматизация и управление», специальности 220301 «Автоматизация технологических процессов и производств», очной и заочной форм обучения/ Н. А. Секушин. – Сыктывкар: СЛИ, 2008. – С. 44-48.
  9. Hill K. Analyzing the dryer section’s steam and condensate system [Text]/ K. Hill. – Tappi, 1993. – P. 105-108.
  10. Weise, U. Characterization and mechanism of changes in wood pulp fibres caused by water removal [Text]/ U. Weise// Polytechnica Scandinavica, Chemical Technology Series. – 1997. – № 249. – P. 204-205.
  11. Fliate, D. M. (1988). Tekhnolohiia bumahi. M.: Lesn. prom-st', 440.
  12. Ivanov, S. N. (1960). Tekhnolohiia bumahi. M.: Hoslesbumizdat, 719.
  13. Kvasko, M. Z., Pіrhach, M. S., Zhikharieva, A. V. (2009). Avtomatichne keruvannia napіrnim iashchikom іz povіtrianoiu podushkoiu. Khіmіchna іnzhenerіia, ekolohіia ta resursozberezhennia, №1, 54-58.
  14. Malkov, V. H. (2005). Modernizatsiia bumaho-, kartonodelatel'nykh i sushil'nykh mashin. Tselliuloza, bumaha, karton, № 6, 52.
  15. Itskovich, E. L. (2005). Ratsional'naia posledovatel'nost' modernizatsii sushchestvuiushchikh sistem avtomatizatsii proizvodstva. Promyshlennye ASU i kontrollery, № 1, 11.
  16. Akesson, J., Ekvall, J. (2006). Parameter optimization of a paper machine model. Modelica, Section 4, 411-420.
  17. Hrinchenko, I. A., Pozhitkov, V. V., Zhukova, Yu. S. (2009). Sovershenstvovanie sistem upravleniia protsessom sushki bumahi. Tselliuloza. Bumaha. Karton, № 1, 80-81.
  18. Sekushin, N. A. (2008). Tekhnolohicheskie protsessy i proizvodstva. Syktyvkar: SLI, 44-48.
  19. Hill, K. (1993). Analyzing the dryer section’s steam and condensate system. Tappi, 105-108.
  20. Weise, U. (1997). Characterization and mechanism of changes in wood pulp fibres caused by water removal. Polytechnica Scandinavica, Chemical Technology Series, № 249, 204-205.

Downloads

Published

2014-03-18

How to Cite

Жученко, А. І., & Черьопкін, Є. С. (2014). Parametric analysis of paper machine as object of automatic control. Technology Audit and Production Reserves, 2(1(16), 74–78. https://doi.org/10.15587/2312-8372.2014.23451

Issue

Vol. 2 No. 1(16) (2014): Technology audit. Production reserves

Section

Production reserves

License

Copyright (c) 2016 Анатолій Іванович Жученко, Євгеній Сергійович Черьопкін

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.