Research of ANSYS Autodyn capabilities in evaluating the landmine blast resistance of specialized armored vehicles

Authors

DOI:

https://doi.org/10.15587/2706-5448.2021.235397

Keywords:

anti-vehicle mines, pulse explosive loading, armored vehicles, mathematical model of deformation, finite element method

Abstract

The object of research is the processes of pulse explosive loading in an explicit formulation for simulation of complex nonlinear dynamics of solids, gases, and their interactions. One of the most problematic areas of modern studies of nonlinear dynamic loads of materials using a numerical analysis is that such studies usually do not take into account the characteristic transition of the stationary deformation zone of the loaded material to the unsteady one and the front pressure and shockwave velocity variation by time.

The work is aimed at developing a mathematical model of a pulsed load of materials by a shockwave, developing a mathematical apparatus for calculating the parameters of a shockwave, creating analytical dependences of the interaction of a shockwave with a loaded surface. A study of dynamic explosive loading using software based on an explicit method for solving the equations of continuum mechanics is proposed.

In this work, the stress-state equation at a point of the material under pulsed load conditions was further developed, methods for determining the principal stresses and the invariant of the stress tensor, taking into account the pulsed nature of the load, were established. The character of the behavior of the shockwave formed as a result of the detonation of the explosive has been established. Analytical dependences of the interaction of a shockwave with a loaded surface are compiled. A mathematical apparatus has been developed for calculating such parameters of the shockwave as the detonation front pressure and its change in time and the velocity of the shockwave at the moment when it reaches the surface.

Mathematical dependences have been developed and proposed, which, in contrast to the existing ones, make it possible to determine the current values of stresses and strains passing through the points of the actual stress curve, as well as the intensity of stresses and strains under pulse loading of metals.

On the basis of theoretical and experimental studies of the parameters of body material deformation under the action of explosive loading, the mechanisms of destruction of the KrAZ «Shrek» and KrAZ «Fiona» (Ukraine) specialized armored vehicles body were clarified to establish the compliance of the declared landmine resistance of vehicles with the STANAG 4569 standardization agreement.

Author Biography

Sergii Shlyk, Kremenchuk Mykhailo Ostrohradskyi National University

PhD, Associate Professor

Department of Manufacturing Engineering

References

  1. Gulzhan, A. K., Ursign, H., Yeonju, J., Pascal, R. (2018). Global mapping and analysis of anti-vehicle mine incidents in 2017. Geneva: GICHD–SIPRI. Available at: https://www.sipri.org/sites/default/files/2018-05/global_mapping_and_analysis_of_anti-vehicle_mine_incidents_in_2017.pdf
  2. NATO AEP-55 STANAG 4569 – Protection Levels for Occupants of Logistic and Light Armoured Vehicles. Available at: http://ballistics.com.au/technical/industry-ballistic-stab-resistant-standards/#stanag
  3. Trotsko, O., Shlyk, S. (2018). Development of the Sheet Blanks Forming Mathematical model for Calculation Using Simulation in ANSYS Software. 2018 IEEE International Scientific and Technical Conference on Computer Sciences and Information Technologies (CSIT), 169–172. doi: http://doi.org/10.1109/stc-csit.2018.8526614
  4. Fiserova, D. (2006). Numerical Analyses of Buried Mine Explosions with Emphasis on Effect of Soil Properties on Loading. Cranfield. Available at: https://dspace.lib.cranfield.ac.uk/bitstream/handle/1826/1209/darina%20fiserova.pdf
  5. Banadaki, M. M. D. (2010). Stress-wave induced Fracture in Rock due to Explosive Action. Toronto. Available at: https://tspace.library.utoronto.ca/bitstream/1807/27567/1/DehghanBanadaki_Mahdi_201011_PhD_Thesis.pdf
  6. Vorobyov, V., Pomazan, M., Shlyk, S., Vorobyova, L. (2017). Simulation of dynamic fracture of the borehole bottom taking into consideration stress concentrator. Eastern-European Journal of Enterprise Technologies, 3 (1 (87)), 53–62. doi: http://doi.org/10.15587/1729-4061.2017.101444
  7. Laine, L., Ranestad, O., Sandvik, A., Snekkevik, A. (2002). Numerical Simulation of Anti-Tank Mine Detonations. Shock Compression of Condensed Matter, 431–434. doi: http://doi.org/10.1063/1.1483570
  8. Aubram, D., Rackwitz, F., Wriggers, P., Savidis, S. A. (2015). An ALE method for penetration into sand utilizing optimization-based mesh motion. Computers and Geotechnics, 65, 241–249. doi: http://doi.org/10.1016/j.compgeo.2014.12.012
  9. Kurtoğlu, I. (2017). A Review of S-ALE Solver for Blast Simulations. 11th European LS-DYNA Conference. Available at: https://www.researchgate.net/profile/Ilker-Kurtoglu/publication/320727967_A_Review_of_S-ALE_Solver_for_Blast_Simulations/links/59f80a9aa6fdcc075ec7cbd9/A-Review-of-S-ALE-Solver-for-Blast-Simulations.pdf
  10. Dragobetskii, V., Shapoval, A., Mos’pan, D., Trotsko, O., Lotous, V. (2015). Excavator bucket teeth strengthening using a plastic explosive deformation. Metallurgical and Mining Industry, 4, 363–368.
  11. Zaidi, A. M. A., Koslan, F. S., Othman, Z., Manar, G. (2013). Appropriate Coupling Solvers for the Numerical Simulation of Rolled Homogeneous Armor Plate Response Subjected to Blast Loading. Advances in Mechanical Engineering, 5, 637564. doi: http://doi.org/10.1155/2013/637564
  12. Neuberger, A., Peles, S., Rittel, D. (2009). Springback of circular clamped armor steel plates subjected to spherical air-blast loading. International Journal of Impact Engineering, 36 (1), 53–60. doi: http://doi.org/10.1016/j.ijimpeng.2008.04.008
  13. Laine, L., Sandvik, A. (2001). Derivation of mechanical properties for sand. 4th Asia-Pacific Conference on Shock and Impact Loads on Structures Singapore, 361–368.
  14. Dragobetskii, V., Shapoval, A., Naumova, O., Shlyk S., Mospan, D., Sikulskiy, V. (2017). The Technology of Production of a Copper – Aluminum – Copper Composite to Produce Current Lead Buses of the High – Voltage Plants. IEEE International Conference on Modern Electrical and Energy Systems, 400–403. doi: http://doi.org/10.1109/mees.2017.8248944
  15. Dragobetskii, V., Zagirnyak, V., Shlyk, S., Shapoval, A., Naumova, O. (2019). Application of explosion treatment methods for production Items of powder materials. Przeglad Elektrotechniczny, 95 (5), 39–42.
  16. Dragobetskii, V., Zagirnyak, M., Naumova, O., Shlyk, S., Shapoval, A. (2018). Method of Determination of Technological Durabilityof Plastically Deformed Sheet Parts of Vehicles. International Journal of Engineering & Technology, 7 (4.3), 92–99. doi: http://doi.org/10.14419/ijet.v7i4.3.19558

Downloads

Published

2021-06-30

How to Cite

Shlyk, S. (2021). Research of ANSYS Autodyn capabilities in evaluating the landmine blast resistance of specialized armored vehicles. Technology Audit and Production Reserves, 3(1(59), 6–15. https://doi.org/10.15587/2706-5448.2021.235397

Issue

Vol. 3 No. 1(59) (2021): Industrial and technology systems

Section

Mechanics: Original Research

License

Copyright (c) 2021 Sergii Shlyk

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.