Research of the impact of vibration on the efficiency of dissemination of loose plant products from the motor vehicle bodies
DOI:
https://doi.org/10.15587/2706-5448.2021.237231Keywords:
bulk crop products, internal friction, angle of repose, body lift angle, dump truck, loading and unloading operationsAbstract
The object of research is the process of unloading bulk crop products from the bodies of dump trucks, the subject of the study is the dependence of the energy consumption of unloading on the properties of products when exposed to vibration. This dependence is understood as a change in the properties of bulk products, such as internal friction and the angle of repose, in the direction of decreasing, providing a decrease in the angle of lift of the body. One of the most problematic areas is the lack of objective information on the dependence of the required lifting angles of the dump truck body when unloading fine-grained crop products when exposed to vibrations. There is also insufficient information on the dependence of these angles on vibration frequency for each of the products.
In the course of the study, an experimental method was used to determine the angles of natural bevel for different crops without and under the influence of vibrations of different frequencies on the reference area. The proposed development makes it possible to quantitatively assess the degree of influence of vibrations, their frequencies and time of impact on the frictional properties of bulk crop products. The degree of reduction of internal friction in these products and the maximum angles of lifting the body required for its unloading were experimentally determined, and numerical data were obtained on their reduction under the influence of vibrations. The results obtained allow to consider it an effective tool for obtaining objective information about the effect of vibrations on the characteristics of internal friction of bulk crop products. This made it possible to determine the degree of influence of the lift angle of the dump truck body during unloading and to reduce energy costs. In contrast to the existing ones, the proposed development makes it possible to differentiate these angles depending on the frequency and time of exposure to vibration, as well as on a specific product. Certain parameters make it possible to regulate them to achieve minimum energy consumption.
References
- Shyrokyi, H. M. (2020). Natsionalnyi instytut stratehichnykh doslidzhen. Svitovyi rynok zernovykh kultur v umovakh pandemii koronavirusu. Available at: https://niss.gov.ua/sites/default/files/2020-07/svitovyi-rynok-zerna-1.pdf
- Gidaspow, D. (1994). Multiphase flow and fluidization: Continuum and kinetic theory descriptions. Boston: Academic Press Inc., 211. doi: http://doi.org/10.1016/c2009-0-21244-x
- Huilin, L., Yongli, S., Yang, L., Yurong, H., Bouillard, J. (2001). Numerical Simulations of Hydrodynamic Behaviour in Spouted Beds. Chemical Engineering Research and Design, 79 (5), 593–599. doi: http://doi.org/10.1205/02638760152424370
- Kunii, D., Levenspiel, O. (1991). Fluidization Engineering. Butterworth-Heinemann, 491.
- Perevezennia vantazhiv avtomobilnym transportom za vydamy vantazhiv za 2019 rik. Derzhavna sluzhba statystyky Ukrainy. Available at: http://www.ukrstat.gov.ua/operativ/operativ2019/tr/pv_avt/pv_avt_u/pv_avt12m19_u.htm
- Derzhavna sluzhba statystyky Ukrainy. Available at: http://www.ukrstat.gov.ua
- Hrechka, O. V. (2015). Statystychnyi analiz rynku posluh avtomobilnoho transportu. Kyiv, 20.
- Iskovych-Lototskyi, R. D., Ivanchuk, Ya. V. (2008). Pidvyshchennia efektyvnosti rozvantazhennia materialiv pid diieiu periodychnykh udarnykh impulsiv. Vibratsii v tekhnitsi i tekhnolohiiakh, 2 (51), 8–11.
- Opanasiuk, Ye. H., Beherskyi, D. B., Opanasiuk, O. Ye. (2018). Pidvyshchennia efektyvnosti rozvantazhuvalnykh robit nezviaznykh budivelnykh materialiv iz kuzoviv samoskydiv. Naukovi notatky Mizhvuzivskyi zbirnyk (za haluziamy znan «Tekhnichni nauky»), 62, 167–171.
- Iskovich-Lototskiy, R. D., Matveev, I. B., Krat, V. A. (1982). Mashiny vibratsionnogo i vibroudarnogo deystviya. Kyiv: Tekhnіka, 35–87.
- Poturaev, V. N., Franchuk, V. P., Chervonenko, A. G. (1964). Vibratsionnye transportiruyuschie mashiny. Moscow: Mashinostroenie, 222.
- Opanasiuk, Ye. H., Fesiuk, S. O. (2019). Doslidzhennia vplyvu vibrodii na sypki produkty roslynnytstva na enerhoiemnist rozvantazhuvannia avtomobiliv-samoskydiv. Transportni tekhnolohii. Zhytomyr, 238.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Evgen Opanasyuk, Dmytro Beherskyi, Mykola Mozharovskyi, Ivan Vitiuk
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
