Estimation of the error of the simplified algorithm of processing of functions of deflations of deformed frames of bodies of rolling stock

Authors

DOI:

https://doi.org/10.15587/2706-5448.2021.237296

Keywords:

rolling stock, rolling stock inspection, body frame deformation, geometric characteristics, level, measurement error

Abstract

The study is aimed at assessing the size of the error that arises when processing the results of examining the geometric characteristics of the bearing structures of rolling stock units using an algorithm without using trigonometric functions. The object of the research is a method of simplified alignment of the deflection function of body frame beams to the horizontal plane. One of the biggest problem areas is the lack of understanding by some customers of the work of the possibility of using this algorithm due to the lack of information about the errors that arise in the simplified calculation.

The study was carried out by comparing the results of processing the initial data by two methods, obtained during the work on the inspection of the state of the supporting structures of the unit of the shunting diesel locomotive TGM6. One method, the algorithm of which is the subject of this study, assumes that no complex calculations are used during data processing. The second method involves the use of an algorithm for aligning the deflection functions of the body frame beams of a rolling stock unit of railways in the horizontal plane, taking into account all trigonometry tools, which will exclude the accompanying calculation errors of the simplified method.

After processing the initial data, two sets of results were obtained – with the desired calculation error and without. Comparison of these datasets yielded an error value for frame tilt of 5.7. For clarity, the size of the error was compared with the expanded uncertainty values of the main sources of uncertainty in the methodology for examining the bearing structures of rolling stock. On the basis of the analysis of two methods of leveling the inclination to the horizontal plane of the deformed rolling stock body frame, the expediency of such an approach has been proved.

The results obtained make it possible to reasonably use the Simplified approach to processing the data obtained during the survey of the geometric characteristics of the rolling stock. If necessary, the developed mathematical model can be used to improve the accuracy of calculating the uncertainty of measurements of geometric characteristics, as well as for use in the study of modification of existing or development of new measurement techniques

Author Biography

Yevhen Horobets, Limited Liability Company «Scientific and Production Enterprise «Ukrtransakad»

 

Specialist

References

  1. DSTU EN ISO/IEC 17025:2019 Zahalni vymohy do kompetentnosti vyprobuvalnykh ta kalibruvalnykh laboratorii (EN ISO/IEC 17025:2017, IDT; ISO/IEC 17025:2017, IDT) (2021). Kyiv: DP «UkrNDNTs», 30.
  2. Blaschuk, V. N., Bunov, I. A., Khoang, Sh. M., Lubenko, V. N. (2011). Teoreticheskie osnovy primeneniya lazernykh takheometrov v izmeritelnoy sisteme, privyazannoy k korpusu sudna. Vestnik AGTU. Seriya: Morskaya tekhnika i tekhnologiya, 2, 13–19.
  3. Nguen, Ch. A., Lubenko, V. N. (2014). Use of tacheometer sensors in quality control systems in shipbuilding. Vestnik AGTU. Seriya: Upravlenie, vychislitelnaya tekhnika i informatika, 2, 52–57.
  4. Seredovich, A. V., Ivanov, A. V. (2005). Kontrol geometricheskikh kharakteristik elementov elektricheskikh mashin metodom lazernogo skanirovaniya. Interekspo Geo-Sibir, 1.
  5. Pimshin, Yu. I., Naumenko, G. A., Postoy, L. V., Burdakov, S. M. (2017). Monitoring of the Nuclear Engineering Large Size Products. Globalnaya yadernaya bezopasnost, 2 (23), 47–55.
  6. Ćmielewski, K., Gołuch, P., Kuchmister, J., Wilczyńska, I., Ćmielewski, B., Grzeja, O. (2021). Detection of crane track geometric parameters using UAS. Automation in Construction, 128, 103751. doi: http://doi.org/10.1016/j.autcon.2021.103751
  7. Skvortsov, B. V., Malysheva-Stroykova, A. N., Chernykh, A. V. (2016). A method of the laser-television control of geometric parameters of objects with complex shapes. Instruments and Experimental Techniques, 59 (1), 63–68. doi: http://doi.org/10.1134/s0020441216010310
  8. Demkin, V. N., Stepanov, V. A., Shadrin, M. V. (2013). Rapid prototyping systems with laser scanning. Nauchno-tekhnicheskie vedomosti SPbGPU. Fiziko-matematicheskie nauki, 3 (177), 136–143.
  9. Danilov, V. A., Fedorov, A. V., Bezvershenko, L. S. (2019). The Comparison of the Methods of Photogrammetry and Laser scanning for the Establishment of three-Dimensional Models of objects and territories of Archeological GIs (on the Example of the Archeological Excavation of Uvek Hillfort). Izv. Sarat. un-ta Nov. ser. Ser. Nauki o Zemle, 2, 72–78.
  10. Li, D., Wei, R., Du, Y., Guan, X., Zhou, M. (2017). Measurement methods of geometrical parameters and amount of corrosion of steel bar. Construction and Building Materials, 154, 921–927. doi: http://doi.org/10.1016/j.conbuildmat.2017.08.018
  11. Rukovodstvo po srednemu i kapitalnomu remontu teplovozov tipa TEM2. RK 103.11.304-2003 (2003). Moscow, 125.
  12. Teplovoz TGM6A. Rukovodstvo po srednemu i kapitalnomu remontu. 24.02.05.21-83 RK (1985). 42.

Downloads

Published

2021-06-30

How to Cite

Horobets, Y. (2021). Estimation of the error of the simplified algorithm of processing of functions of deflations of deformed frames of bodies of rolling stock. Technology Audit and Production Reserves, 4(1(60), 20–24. https://doi.org/10.15587/2706-5448.2021.237296

Issue

Vol. 4 No. 1(60) (2021): Industrial and technology systems

Section

Mechanics: Reports on Research Projects

License

Copyright (c) 2021 Yevhen Horobets

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.