Construction of mathematical model of the drying process polyethylene terephthalate granulate

Authors

  • Олександр Володимирович Надолинський National Technical University of Ukraine “Kyiv Polytechnic Institute”, Peremohy 37, Kyiv, Ukraine, 03056, Ukraine https://orcid.org/0000-0003-3813-6475
  • Ігор Валентинович Коваленко National Technical University of Ukraine “Kyiv Polytechnic Institute”, Peremohy 37, Kyiv, Ukraine, 03056, Ukraine https://orcid.org/0000-0001-6919-856X

DOI:

https://doi.org/10.15587/2312-8372.2014.25273

Keywords:

polyethylene terephthalate, PET packaging, drying the granules, the mathematical model, moisture content, dryer

Abstract

The paper presents the results of experiments on the optimum conditions of the drying process of  PET granulate. The results of  experiment on isothermal drying of granules are presented. It is necessary for the management mode for drying the granules and further processing.

The results of designed of research show that the process of drying the PET granulate is nonlinear. Thus there is structural alteration of polymer which accompanies the deep (to 0,005%) moving away of moisture from him, that predetermines stability of further technological process. After the analysis of experiments, we concluded that to achieve the desired moisture content must be chough four hours of drying process.

The mathematical model of the process of drying the granulate based on multivariate experiment indicates that the greatest influence on the drying process have such factors as: the time of process passage, the drying temperature and the grain diameter of the material.

Established during the experiment to the optimum drying mode (temperature and time of the process) that will help in saving energy and material resources for companies operating in this area.

Author Biographies

Олександр Володимирович Надолинський, National Technical University of Ukraine “Kyiv Polytechnic Institute”, Peremohy 37, Kyiv, Ukraine, 03056

Department of Сhemical, Polymer and Silicate Engineering

Ігор Валентинович Коваленко, National Technical University of Ukraine “Kyiv Polytechnic Institute”, Peremohy 37, Kyiv, Ukraine, 03056

Ph.D., Associate Professor

Department of Сhemical, Polymer and Silicate Engineering

References

  1. Оссвальд, Т. Лиття пластмас під тиском [Текст]/ под ред. Т. Оссвальда, Л.-Ш. Тунга, П. Дж. Греманна; пер з англ. під ред. Е. Л. Калінчева. – СПб: Професія, 2006. – 712 с.
  2. Таврогинская, М. Г. Влияние степени влажности и параметров сушки на свойства и переработку отходов ПЭТФ [Текст]/ М. Г. Таврогинская, В. В. Тимошенко// Вестник УО «ВГТУ». – 2008. – Т. 22, № 14. – C. 204-212.
  3. Van der Meer, D. W. Oriented Crystallization and Mechanical Properties of Polypropylene Nucleated on Fibrillated Polytetrafluoroethylene Scaffolds [Text]/ D. W. Van der Meer, D. Milazzo, A. Sanguineti, G. J. Vancso// Polymer Engineering & Science. – 2005. – Vol. 45, Issue 4. – P. 458–468. – DOI: 10.1002/pen.20297.
  4. Bernland, K. Nucleating Polymer Crystallization with Poly(tetrafluoroethylene) Nanofibrils [Text]/ K. Bernland, P. Smith// Journal of Applied Polymer Science. – 2009. – Vol. 114, Issue 1. – P. 281–287. – DOI: 10.1002/app.30425
  5. Callister, W. D. Fundamentals of Material Science and Engineering. An Integrated Approach [Text]/ W. D. Callister, R. G. Rethwisch. –Ed. 3. – John Wiley & Sons, Inc., 2007. – 32 p.
  6. Шахтная аэрожелобная сушилка [Текст]: пат. 2506508 Рос. Федерация: МПК F26B17/14/ Волхонов М. С., Курилов С. В. (РФ); заявитель и патентообладатель Общество с ограниченной ответственностью "Тёплый ветер". – №2011144972/06; заявл. 07.11.2011; опубл. 10.02.2014. – 5 с.
  7. Сушилка для сыпучих материалов [Текст]: пат. 2282804 Рос. Федерация: МПК F26B15/06 / Налбандян А. В.; заявитель и патентообладатель Налбандян А.В. – №2005128898/06; заявл. 15.09.2005; опубл. 27.08.2006. – 7 с.
  8. Генкин, А. Э. Оборудование химических заводов [Текст]/ А. Э. Генкин. – М.: Высшая школа, 1986. – 280 с.
  9. Кафаров, В. В. Методы кибернетики в химии и химической технологии [Текст]/ В. В. Кафаров. – М.: Химия, 1985. – 468 с.
  10. Фролов, В. Ф. Моделирование сушки дисперсных материалов [Текст]/ В. Ф. Фролов. – Л.: «Химия», Ленинградское отделение, 1987. – 208 с.
  11. Ossvalda, T., Tunha, L.-Sh., Hremanna, J. P. (2006). Injection molding of plastics. Publ.: Profesiia, 712.
  12. Tavrohynskaia, M., Tymoshenko, V. (2008). Influence of the degree of humidity and drying conditions on the properties and processing of waste PET. Miscellany of Vitebsk state technology University, 14, 20.
  13. Van der Meer, D. W., Milazzo, D., Sanguineti, A., Vancso, G. J. (2005). Oriented Crystallization and Mechanical Properties of Polypropylene Nucleated on Fibrillated Polytetrafluoroethylene Scaffolds. Polymer Engineering & Science, Vol. 45, Issue 4, 458–468. DOI: 10.1002/pen.20297.
  14. Bernland, K., Smith, P. (2009). Nucleating Polymer Crystallization with Poly(tetrafluoroethylene) Nanofibrils. Journal of Applied Polymer Science, Vol. 114, Issue 1, 281–287. DOI: 10.1002/app.30425.
  15. Callister, W. D., Rethwisch, R. G. (2007). Fundamentals of Material Science and Engineering. An Integrated Approach. Ed. 3. John Wiley & Sons, Inc., 32.
  16. Volkhonov, M. S., Kurylov, S. V. (10.02.2014). Mine dryer. Patent №2506508, Rus. Federation, 5.
  17. Nalbandian, A. V. (27.08.2006). Dryer for bulk materials. Patent №2506508, Rus. Federation, 7.
  18. Henkyn, A. E. (1986). Equipment for chemical plants. Moscow: High school, 280.
  19. Kafarov, V. V. (1985). Methods of Cybernetics in Chemistry and Chemical Engineering. Moscow: Chemistry, 468.
  20. Frolov, V. F. (1987). Modeling drying of dispersed materials. L.: «Chemistry», Leningrad Branch, 208.

Downloads

Published

2014-05-29

How to Cite

Надолинський, О. В., & Коваленко, І. В. (2014). Construction of mathematical model of the drying process polyethylene terephthalate granulate. Technology Audit and Production Reserves, 3(1(17), 12–16. https://doi.org/10.15587/2312-8372.2014.25273

Issue

Vol. 3 No. 1(17) (2014): Technology audit

Section

Technology audit

License

Copyright (c) 2016 Олександр Володимирович Надолинський, Ігор Валентинович Коваленко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.