Study of whiskers’ mechanical properties. creep and internal friction


  • Сергей Робленович Артемьев National University of Civil Defense of Ukraine, Str. Chernyshevsky, 94, Kharkov, Ukraine, 61000, Ukraine



whiskers, load, creep, internal friction


The results of the previously conducted studies of whiskers on the changes in properties of creep and internal friction were considered and analyzed in this paper. The results of these studies in terms of the applied load influence on them, leading to a change of crystal structure were analyzed. The conducted analysis of literature data indicates that in these and many other processes whiskers’ properties continue to be negatively influenced by the mechanical properties, including internal friction and creep.

The estimation of such influence is quite important and relevant in current conditions because organometallic compounds continue to occupy a prominent place among other raw materials used in the production of metal powders, films, coatings and even finished gas-phase bulk products. Instead of huge electroplating industries and costly short-lived plants in engineering and electronic enterprises, high-output waste-free production of “small” chemistry appears. They provide not only the production of high-quality products, but also the compliance with environmental requirements for protecting human health and environment.

Author Biography

Сергей Робленович Артемьев, National University of Civil Defense of Ukraine, Str. Chernyshevsky, 94, Kharkov, Ukraine, 61000

Ph.D., Associate Professor

Department of Occupational Safety and Technogenic And Ecological Security 



  1. Shishelova, T. I., Stepanova, N. E., Plynskaia, D. A., Beliaeva, M. A. (2009). Nitevidnye kristally. Uspehi sovremennogo estestvoznaniia, № 8, 12-13.

    Pomerantseva, E. A., Kozlova, M. G., Leonova, L. S., Dobrovol'skiy, Yu. A., Kulova, T. L., Skundin, A. M., Gudilin, E. A., Tret'iakov, Yu. D. (2007). Nitevidnye kristally. Materialy Vserossiyskoy konferentsii "Issledovaniia i razrabotki po prioritetnomu napravleniiu razvitiia nauki, tehnologiy i tehniki «Industriia nanosistem i materialy»", 18-19 ianvaria 2007 goda, g. Moskva. Mezhdunarodnyy nauchnyy zhurnal "Al'ternativnaia energetika i ekologiia", № 1(45), 126-127. Available:

    Hadiia Abass Mohamed Nomeri. (2011). Poluchenie i issledovanie opticheskih svoystv poluprovodnikovyh oksidov ZnO2 i Zn2O3. Voronezh, 128.

    Eisner, R. L. (1959). Growth and Perfection of Crystals, № 21. N. Y.: John Willey, 191.

    Brenner, S. S. (1959). Growth and Perfection of Crystals, № 12. N. Y.: John Willey, 157.

    Cabrera, N., Price, P. B. (1959). Growth and Perfection of Crystals, № 3. N. Y.: John Willey, 204.

    Serebriakov, A. V., Kostiuk, V. H., Zilinh, K. K. (1965). Fizika tverdoho tela. FTT, T. 7, 858.

    Berezhkova, H. V. (1969). Nitevidnye kristally. M.: Hosizdat, 158.

    Price, P. B. (1960, April). On microcreep in zinc whiskers. Philosophical Magazine, Vol. 5, № 52, 417–419. doi:10.1080/14786436008235860.

    Pearson, G., Read, W., Jr., Feldmann, W. (1957, April). Deformation and fracture of small silicon crystals. Acta Metallurgica, Vol. 5, № 4, 181–191. doi:10.1016/0001-6160(57)90164-5.

    Eisner, E. (1960, December 31). Fatigue Straining of Copper Whisker. Nature, Vol. 188, № 4757, 1183–1184. doi:10.1038/1881183b0.

    Oding, I. A., Kop'ev, I. M. (1961). Metallovedenie i termicheskaia obrabotka metallov, №. 9, 44.

    Oding, I. A., Kop'ev, I. M. (1961). Dislokatsii v metallah i voprosy prochnosti. Izd. AN SSSR, 20.

    Postnikov, V. S., Ammer, S. A., Kosilov, A. T., Belikov, A. M. (1966). Relaksatsionnye svoystva mednozheleznyh nitevidnyh kristallov. FMM, T. 21, № 5, 770-773.

    Zevu, P. W., Cammerer, O. F. (1955). Appl. Phys., № 26, 182.

    Postnikov, V. S., Ammer, S. A., Kosilov, A. T. (1967). Fizika tverdogo tela, T. 9, № 1, 227-231.

    Schurerova, E. (1964). Cescosl. Casop. Fys., № 14, 151.



How to Cite

Артемьев, С. Р. (2014). Study of whiskers’ mechanical properties. creep and internal friction. Technology Audit and Production Reserves, 5(3(19), 16–18.

Most read articles by the same author(s)